Kitz Forum

Broadband Related => Broadband Hardware => Topic started by: namster on July 24, 2016, 05:23:28 PM

Title: VR-600 port forwarding
Post by: namster on July 24, 2016, 05:23:28 PM

Hi All
Just received the VR-600 as replacement for my aging Plusnet Technicolor TG58N . Fanatastic for the price/Quality/Performance. Could anyone please help with port-fowarding. I am trying to setup forwarding for a Hikvision IP camera but can't see where that would be added in the Config

Thank you

Title: Re: VR-600 port forwarding
Post by: roseway on July 24, 2016, 06:33:35 PM

I've split this off from the thread it was attached to.

Title: Re: VR-600 port forwarding
Post by: NEXUS2345 on July 24, 2016, 07:25:07 PM

Port forwarding is called Virtual Servers I believe on the TP-Link software. I have the C2600 (very similar software) and that is all I can find that has the appropriate parameters.

Title: Re: VR-600 port forwarding
Post by: Chunkers on July 25, 2016, 07:51:24 AM

TP -Link has a really good website with emulators for most of the WebUI's of its routers if you want to have a fiddle.

http://www.tp-link.com/en/emulators.html (http://www.tp-link.com/en/emulators.html)

According to what I can see NEXUS is absolutely right, you go to 'Advanced mode' - NAT forwarding = Virtual servers.

(https://forum.kitz.co.uk/proxy.php?request=http%3A%2F%2Fi43.photobucket.com%2Falbums%2Fe352%2FJolltax%2FCrap%2Fwapachow_zpszqmlsnpw.jpg&hash=096940ed70cfcfb89813733a619d833b7ee1526a)

Yeeeeehaaaaaaaaaaaaaaaa .......  :fingers:

Chunks