Does this affect the upload17.exe as I am still using the one from 6.0.2? 6.0.6 runs ok with the old upload17 but otherwise stops working with new version.
Version 6.0.6 of DSLstats adds just one feature - the vectoring state is included in MDWS uploads, and MDWS adds an additional traffic light to indicate the vectoring state. On MDWS, when you hover the mouse over the vectoring traffic light it displays extra explanatory information.
Unfortunately HG612_Modem_Stats won't be supporting this feature yet, because we've been unable to contact Bald_Eagle1 for some time.
Downloads: http://dslstats.me.uk/downloads.html
Unfortunately HG612_Modem_Stats won't be supporting this feature yet, because we've been unable to contact Bald_Eagle1 for some time.
Downloads: http://dslstats.me.uk/downloads.html
Excellent! I see it, all greens.And so can everyone else now as it's all enabled on MDWS along with All User Stats :cool:
I think you will find they are all grey, not blue so not enabled as the hover data shows.
I agree that the words shown, when hovering the cursor over the right-hand "traffic light" set, state grey but visually, to me, they are very pale blue. :PSpecsavers comes to mind :lol:
But we're not going to squabble over it. :drink:
I've changed it to a darker shade of grey just for you
0 = VECT_WAIT_FOR_CONFIG
1 = VECT_FULL
2 = VECT_WAIT_FOR_TRIGGER
3 = VECT_RUNNING
4 = VECT_DISABLED
5 = VECT_UNCONFIGURED
Sorry if obvious but why are there three lights instead of one?Because there are people that mistake blue for green and three is more obvious....
There is now only one central light displayed for all states (except data errors) against a pure black background rather than adjacent to greys in many cases.
it could be that if ECI ever goes live with Vectoring that it has different codes?
Sorry, I don't understand why the vectoring status is included with the traffic lights showing the (not) ILQ status?
For now to hopefully assist everyone, I've added another configuration setting to Options that allows you to select the old three light Vectoring display (the one with grey lights as it was before switching to the current one) or stay with the single light and black background.
Now the Graph Status bar mirrors that to some extent by removing the extra set of traffic lights and replacing by a coloured text box similar to the existing G.INP one (as suggested by newt). Hovering will give more info as before.
That looks so much better just need to install DSLstats 6.0.6 on the old RPi the problem the newer updates seem to cause gaps, there is section called Secs (upload at n Secs) and notice if I upload 11 seconds past the minute it's ok, I m not really sure what Secs are if i am honest.Er - Seconds. Try hovering over the cell and it'll explain although you seem to have realised. It's there to help avoid uploading at or close to 00 secs which causes problems if you have a fast device when uploading starts quickly.
Tony, I'm really liking the updated vectoring display, much nicer than the old one :thumbs:. Just as a suggestion, presuming it fits would it not be more descriptive to have "Vectoring Upload Not Supported" rather than "Vectoring Not Supported" when an uploader is using HG612 Stats?Tried originally and doesn't fit in various ways but you obviously understand what the short version means. The hover tells the full story. Both roseway and I have tried to contact BE1 but he's not been around for at least a year.
Is it possible for HG612-modem-stats to be updated? Is the source code available?
Tried originally and doesn't fit in various ways but you obviously understand what the short version means. The hover tells the full story. Both roseway and I have tried to contact BE1 but he's not been around for at least a year.
I will monitor and see if that swapping reduces in frequency over the coming days or indeed stopsI don't think it will stop as explained earlier in this thread by Chrysalis:
Vectoring has 2 operating modes.
One of the modes makes it so a modem can transmit vectoring compatible signals so it wont crosstalk to fully enabled vectored lines, the other mode is full vectoring where not only does it transmit compatible signals but it can also utilise other vectored signals to kill crosstalk. I believe the 1 state is fully vectoring, the 3 state is vectoring compatible signal but no active crosstalk mitigation
tony I dont think 1 and 3 are equal to each other.
Vectoring has 2 operating modes.
One of the modes makes it so a modem can transmit vectoring compatible signals so it wont crosstalk to fully enabled vectored lines, the other mode is full vectoring where not only does it transmit compatible signals but it can also utilise other vectored signals to kill crosstalk. I believe the 1 state is fully vectoring, the 3 state is vectoring compatible signal but no active crosstalk mitigation.
I think state 3 VECT_RUNNING probably indicates that the modem is currently doing something (perhaps sending the error samples) at the particular moment you're checking the state.
2017-10-17T19:52:12: state: 1 pkts sent: 329882 disc: 0 status sent: 164941 disc: 0
2017-10-17T19:52:17: state: 1 pkts sent: 329882 disc: 0 status sent: 164941 disc: 0
2017-10-17T19:52:22: state: 3 pkts sent: 330014 disc: 0 status sent: 165007 disc: 0
2017-10-17T19:52:27: state: 3 pkts sent: 330178 disc: 0 status sent: 165089 disc: 0
2017-10-17T19:52:32: state: 1 pkts sent: 330216 disc: 0 status sent: 165108 disc: 0
2017-10-17T19:52:38: state: 1 pkts sent: 330216 disc: 0 status sent: 165108 disc: 0
2017-10-17T20:49:06: state: 1 pkts sent: 339488 disc: 0 status sent: 169744 disc: 0
2017-10-17T20:49:11: state: 1 pkts sent: 339488 disc: 0 status sent: 169744 disc: 0
2017-10-17T20:49:17: state: 2 pkts sent: 339488 disc: 0 status sent: 169744 disc: 0
2017-10-17T20:49:22: state: 1 pkts sent: 339642 disc: 0 status sent: 169821 disc: 0
2017-10-17T20:49:27: state: 1 pkts sent: 339642 disc: 0 status sent: 169821 disc: 0
2017-10-17T20:23:47: state: 1 pkts sent: 334578 disc: 0 status sent: 167289 disc: 0
2017-10-17T20:23:52: state: 2 pkts sent: 334578 disc: 0 status sent: 167289 disc: 0
2017-10-17T20:23:57: state: 3 pkts sent: 334740 disc: 0 status sent: 167370 disc: 0
2017-10-17T20:24:02: state: 3 pkts sent: 334902 disc: 0 status sent: 167451 disc: 0
2017-10-17T20:24:08: state: 1 pkts sent: 334904 disc: 0 status sent: 167452 disc: 0
2017-10-17T20:49:11: state: 1 pkts sent: 339488 disc: 0 status sent: 169744 disc: 0
2017-10-17T20:49:17: state: 2 pkts sent: 339488 disc: 0 status sent: 169744 disc: 0
2017-10-17T20:49:22: state: 1 pkts sent: 339642 disc: 0 status sent: 169821 disc: 0
2017-10-17T21:28:25: state: 1 pkts sent: 343056 disc: 0 status sent: 171528 disc: 0
2017-10-17T21:28:30: state: 3 pkts sent: 343090 disc: 0 status sent: 171545 disc: 0
2017-10-17T21:28:35: state: 3 pkts sent: 343252 disc: 0 status sent: 171626 disc: 0
2017-10-17T21:28:40: state: 2 pkts sent: 343414 disc: 0 status sent: 171707 disc: 0
2017-10-17T21:28:46: state: 1 pkts sent: 343414 disc: 0 status sent: 171707 disc: 0
2017-10-17T21:57:52: state: 1 pkts sent: 348918 disc: 0 status sent: 174459 disc: 0
2017-10-17T21:57:57: state: 3 pkts sent: 348976 disc: 0 status sent: 174488 disc: 0
2017-10-17T21:58:02: state: 3 pkts sent: 349138 disc: 0 status sent: 174569 disc: 0
2017-10-17T21:58:07: state: 2 pkts sent: 349228 disc: 0 status sent: 174614 disc: 0
2017-10-17T21:58:13: state: 1 pkts sent: 349228 disc: 0 status sent: 174614 disc: 0
2017-10-17T21:58:18: state: 3 pkts sent: 349354 disc: 0 status sent: 174677 disc: 0
2017-10-17T21:58:23: state: 1 pkts sent: 349382 disc: 0 status sent: 174691 disc: 0
2017-10-17T22:32:01: state: 1 pkts sent: 353780 disc: 0 status sent: 176890 disc: 0
2017-10-17T22:32:06: state: 2 pkts sent: 353780 disc: 0 status sent: 176890 disc: 0
2017-10-17T22:32:11: state: 1 pkts sent: 353934 disc: 0 status sent: 176967 disc: 0