Kitz Forum
Broadband Related => Broadband Hardware => Topic started by: lawes84 on October 21, 2017, 01:10:00 PM
-
I've unlocked the HG612
but when i telnet to get stats, all i get is a '^'
telnet> o 192.168.1.1
Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.
Welcome Visiting Huawei Home Gateway
Copyright by Huawei Technologies Co., Ltd.
Login:admin
Password:
ATP>xdslcmd info --stats
^
ATP>
-
The 'sh' at the prompt and you should then get a hash (#) prompt where you can enter the commands.
-
Thanks.
We switched to talktalk a few weeks ago and once connected we was getting 72mpbs speedtest download, and router said 79999mpbs max speed.
After a couple of weeks, router says 55555mpbs and speedtest peaks at 54000mpbs.
I've gone back to using the hg612 because it was always stable.....
Can anyone help make sense of these stats?
thanks
# xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 35707 Kbps, Downstream rate = 93528 Kbps
Bearer: 0, Upstream rate = 18998 Kbps, Downstream rate = 53796 Kbps
Discovery Phase (Initial) Band Plan
US: (7,32) (871,1205) (1972,2782)
DS: (33,859) (1216,1961) (2793,3959)
Medley Phase (Final) Band Plan
US: (7,32) (871,1205) (1972,2782)
DS: (33,859) (1216,1961) (2793,3959)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 35707 kbps 93528 kbps
Actual Aggregate Tx Power: - 6.6 dBm 13.6 dBm
====================================================================================
VDSL Band Status U0 U1 U2 U3 U4 D1 D2 D3
Line Attenuation(dB): 3.9 10.9 13.8 N/A N/A 5.5 12.4 18.7
Signal Attenuation(dB): 3.9 10.2 13.1 N/A N/A 6.6 12.4 18.7
SNR Margin(dB): 12.1 12.1 12.0 N/A N/A 12.6 12.6 12.6
TX Power(dBm): -20.9 -32.1 -6.9 N/A N/A 10.7 7.9 6.9
# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 35707 Kbps, Downstream rate = 93756 Kbps
Bearer: 0, Upstream rate = 18998 Kbps, Downstream rate = 53796 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 12.6 12.0
Attn(dB): 9.8 0.0
Pwr(dBm): 13.6 -6.6
VDSL2 framing
Bearer 0
MSGc: 14 30
B: 35 24
M: 1 1
T: 64 64
R: 16 14
S: 0.0213 0.0418
L: 19536 7466
D: 1527 535
I: 52 39
N: 52 39
Counters
Bearer 0
OHF: 1351317 575576
OHFErr: 0 0
RS: 432236207 1972006
RSCorr: 6 4039
RSUnCorr: 0 0
Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 239021227 0
Data Cells: 1609141 0
Drop Cells: 0
Bit Errors: 0 0
ES: 0 0
SES: 0 0
UAS: 26 26
AS: 2309
Bearer 0
INP: 5.00 4.00
INPRein: 0.00 0.00
delay: 8 5
PER: 1.71 4.02
OR: 93.55 71.50
AgR: 53889.18 19069.10
Bitswap: 18/18 5/5
# xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 35711 Kbps, Downstream rate = 93756 Kbps
Bearer: 0, Upstream rate = 18998 Kbps, Downstream rate = 53796 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 12.6 12.1
Attn(dB): 9.8 0.0
Pwr(dBm): 13.6 -6.6
VDSL2 framing
Bearer 0
MSGc: 14 30
B: 35 24
M: 1 1
T: 64 64
R: 16 14
S: 0.0213 0.0418
L: 19536 7466
D: 1527 535
I: 52 39
N: 52 39
Counters
Bearer 0
OHF: 1370614 583570
OHFErr: 0 0
RS: 438410992 746683
RSCorr: 6 4039
RSUnCorr: 0 0
Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 242434712 0
Data Cells: 1632482 0
Drop Cells: 0
Bit Errors: 0 0
ES: 0 0
SES: 0 0
UAS: 26 26
AS: 2342
Bearer 0
INP: 5.00 4.00
INPRein: 0.00 0.00
delay: 8 5
PER: 1.71 4.02
OR: 93.55 71.50
AgR: 53889.18 19069.10
Bitswap: 18/18 5/5
Total time = 39 min 28 sec
FEC: 6 4039
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 26 26
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 15 minutes time = 9 min 28 sec
FEC: 0 1224
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 3 617
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 39 min 28 sec
FEC: 6 4039
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 26 26
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 39 min 1 sec
FEC: 6 4039
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
-
Use this telnet command to find out the type of cabinet you're connected to
xdslcmd info --vendor
-
# xdslcmd info --vendor
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 35684 Kbps, Downstream rate = 93756 Kbps
Bearer: 0, Upstream rate = 18998 Kbps, Downstream rate = 53796 Kbps
ChipSet Vendor Id: BDCM:0xa48c
ChipSet VersionNumber: 0xa48c
ChipSet SerialNumber:
-
(https://forum.kitz.co.uk/proxy.php?request=http%3A%2F%2Fwww.speedtest.net%2Fresult%2F6725475741.png&hash=6f3e0b060454b23c152af0b161838ea7fd4b6a7d) (http://www.speedtest.net/my-result/6725475741)
current speedtest using ethernet plugged into the hg612.
-
Should definitely be getting full 80Mb.
93Mb attainable and 9.8dB attention shows you're pretty close to your cabinet which is a Huawei, which is good.
You got quite high interleaving applied at the moment. In the next few weeks DLM should apply retransmission (G.INP).
Is the downstream sync rate always 53796? Very odd that is syncing so low. I recommend installing DslStats (http://dslstats.me.uk) and registering for an account on MyDSLWebStats (https://www.mydslwebstats.co.uk/mdws-rg.php). This lets everyone see detailed graphs of your connection and will help get to the bottom of the low sync. It should be up at 79999 for sure.
-
I would guess the modem you were using instead of the HG612 caused a lot of disconnections resulting in your line being banded to raise the SNRM to 12. Assuming the HG612 stops the disconnections, your line should improve in the next 10-15 days.