Kitz Forum
Broadband Related => ADSL Issues => Topic started by: walsh155 on January 22, 2010, 11:14:03 PM
-
ADSL line status
Connection Information
Line state Connected
Connection time 0 days, 21:32:07
Downstream 672 Kbps
Upstream 448 Kbps
ADSL Settings
VPI/VCI 0/38
Type PPPoA
Modulation G.992.1 Annex A
Latency type Interleaved
Noise margin (Down/Up) 9.0 dB / 12.0 dB
Line attenuation (Down/Up) 71.0 dB / 31.5 dB
Output power (Down/Up) 1.4 dBm / 1.1 dBm
Loss of Framing (Local/Remote) 0 / 0
Loss of Signal (Local/Remote) 0 / 0
Loss of Power (Local/Remote) 0 / 0
FEC Errors (Down/Up) 16810 / 374
CRC Errors (Down/Up) 250 / 133
HEC Errors (Down/Up) 368 / 90
Error Seconds (Local/Remote) 142 / 75
-
If the sync speed (672kbps) is the same or greater than before then a 9db noise margin is better than a 7.7db. Have you changed something and have you taken a note of the noise margin at the same time of day? The noise margin will be less during darkness than during the day in general.
-
hey duckson thanks for replying so the lower it is the better? because 2 days ago i was having 804kbits and the noise was 7.7Db
-
And hey sorry i forgot to say is there anything wrong with the output power because i have seen other home hubs and i show around 14Db
-
hey duckson thanks for replying so the lower it is the better? because 2 days ago i was having 804kbits and the noise was 7.7Db
Lower the noise margin faster you will sync. Resync tomorrow morning whens its light and it should sync faster but have a lower noise margin. How far does the noise margin drop from daytime to night?
-
It's confusing to have multiple threads on the same subject, so please continue the discussion in the original thread here. (http://forum.kitz.co.uk/index.php/topic,6642.0.html)
Topic locked.