Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[bigbadbrit101]

I have no idea how to do this on the linksys, anyone help a guy out?

[roseway]

That depends on what ADSL chip it uses. If it's a Broadcom chipset, and you can access it by telnet, then this note contains just about all I know on the subject. If it's not Broadcom, then you probably can't tweak it.

[bigbadbrit101]

That depends on what ADSL chip it uses. If it's a Broadcom chipset, and you can access it by telnet, then this note contains just about all I know on the subject. If it's not Broadcom, then you probably can't tweak it.

I have no idea where to put those command lines.

[roseway]

http://www.kitz.co.uk/routers/telnet_router.htm tells you how to use telnet.

[bigbadbrit101]

For some reason it won't let me connect to my router using telnet :/ when I use "telnet 19.2.168.1.1" in run,

[roseway]

"telnet 19.2.168.1.1"

I presume that's just a typo in your note, and you actually typed "telnet 192.168.1.1"? If that doesn't allow access, then I'm afraid it looks as if you won't be able to tweak this router.

[bigbadbrit101]

Just looked it up and linksys WAG120n does not support telnet due to it's ever crappy firmware. Ill try and find custom firmware and then try again.

[iwish]

I have found the Linksys broadcom router to never perform as good as netgear
My Linksys will only sync at just over 3mbps and the netgear will sync at just under 5mbps yet the 2wire hits just under 6mbps
all on 6snr target 2 with broadcom and 2wire with what ever it uses