Hi guys , i have recentley flashed a billion modem /router with the firmware that forces the 6db SNR margin .
The reduction worked like a dream and have acheived a higher sync and through put than i have ever had
before . Trouble is the stats from telnetting the router show no near end CRC or Error seconds.
I always had a few hundred errors of each over a 24H period .
I am just wondering has the new (old) firmware flash solved the problem with a more stable connection or is it that the router is not conveying the correct
info via the telnet command.
ADSL uptime 21:46:51
wan adsl linedata near
relative capacity occupation: 124%
noise margin downstream: 7.0 db
output power upstream: 12.0 dbm
attenuation downstream: 63.5 db
wan adsl chandata
near-end interleaved channel bit rate: 2080 kbps
near-end fast channel bit rate: 0 kbps
far-end interleaved channel bit rate: 448 kbps
far-end fast channel bit rate: 0 kbps wan adsl perfdata
near-end FEC error fast: 0
near-end FEC error interleaved: 47637
near-end CRC error fast: 0
near-end CRC error interleaved: 0
near-end HEC error fast: 0
near-end HEC error interleaved: 2726
far-end FEC error fast: 0
far-end FEC error interleaved: 1083
far-end CRC error fast: 0
far-end CRC error interleaved: 96
far-end HEC error fast: 0
far-end HEC error interleaved: 64
Error second in 15min : 0
Error second in 24hr : 0
Error second after power-up : 0
