> Running Johnson's 1312-B10A-17-jumbo-tel-x6-stats1.1-cmd.bin build, I have a question about baby jumbo frames, is that active by default in bridge mode (there is no MTU box in the config page) or do I need to configure via the cli?
You don’t have to do anything, it’s all set up to PPP MTU 1500+8=1508. Your router will need to be able to support PPP MTU 1508 (RFC 4638 required) too for this to work.
I have the johnson ZyXEL software too in all my ZyXEL VMG1312-B10A modems. It’s superb. Have a look at http://<modem’s-ipv4-addr>:8000 and take a peep at the stats graphs. I use the johnson stats http API in a program on my iPad that queries all my modems.