I have reflash firmware again on Zyxel Gfast Router as the wireless issues has been fixed now. All ok on 5GHz getting 150/28 in all household devices
So I am glad to have one router from the wall socket.
Here is latest stats from Zyzel:
Stats recorded 30 May 2021 11:45:59
DSLAM type / SW version: BDCM:0xc190 (193.144) / v0xc190
Modem/router firmware: AnnexA version - A2pvfbH045o.d27j
DSL mode: G
Status: Showtime
Uptime: 16 hours 27 min 23 sec
Resyncs: 0 (since 30 May 2021 11:25:07)
Downstream Upstream
Line attenuation (dB): 38.0 0.0
Signal attenuation (dB): 38.0 0.0
Connection speed (kbps): 160000 29477
SNR margin (dB): 4.1 3.1
Power (dBm): 0.0 4.0
Interleave depth:
INP: 550.00 540.00
G.INP: Not enabled Not enabled
Vectoring status: Unknown
xdslctl info --stats
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 29477 Kbps, Downstream rate = 209973 Kbps
Bearer: 0, Upstream rate = 29477 Kbps, Downstream rate = 160000 Kbps
Link Power State: L0
Mode: G.fast Annex A
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 4.1 3.1
Attn(dB): 38.0 0.0
Pwr(dBm): 0.0 4.0
Bearer 0
INP: 550.00 540.00
INPRein: 0.00 0.00
delay: 0 0
PER: 0.00 241.24
OR: 378.27 140.00
AgR: 16876.78 15526.97
Since Link time = 16 hours 27 min 23 sec
FEC: 109165 349676
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
FastRetr: 0
FailedRetr: 0
FailedFastRetr: 0
NTR: mipsCntAtNtr=0 ncoCntAtNtr=0
ZySH>