Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 ... 7 8 [9]

Author Topic: Cabinet 25 DSLAM Installation  (Read 5456 times)

j0hn

  • Kitizen
  • ****
  • Posts: 2424
Re: Cabinet 25 DSLAM Installation
« Reply #120 on: June 12, 2019, 11:08:58 AM »

As pointed out previously it can in some cases take a number of weeks for G.INP to be applied (11 weeks for me).

I was the exact same as yourself being the 1st on a brand new cabinet. I thought perhaps something wasn't configured correctly and G.INP wouldn't be applied.

I would have hoped the DLM reset would have speeded up the process but looks like DLM is determined to make you wait.

Unfortunately the DLM is completely automated and there's zero the ISP can do.

The DSLAM doesn't need a firmware upgrade to do G.INP.
It just needs DLM to load that particular line profile.

If you send the command xdslcmd info --vendor with the HG612 it will return the DSLAM chipset/firmware in use.
« Last Edit: June 12, 2019, 11:11:10 AM by j0hn »
Logged
Plusnet FTTC 80/20 -  ECI now Huawei cab
retx low @ 3dB target SNRM
Zyxel VMG1312-B10A bridged with 1508 MTU + Asus RT-AC68U running Asuswrt-Merlin

mentaltom

  • Member
  • **
  • Posts: 72
Re: Cabinet 25 DSLAM Installation
« Reply #121 on: June 12, 2019, 11:12:03 AM »

As pointed out previously it can in some cases take a number of weeks for G.INP to be applied (11 weeks for me).

I was the exact same as yourself being the 1st on a brand new cabinet. I thought perhaps something wasn't configured correctly and G.INP wouldn't be applied.

I would have hoped the DLM reset would have speeded up the process but looks like DLM is determined to make you wait.

Unfortunately the DLM is completely automated and there's zero the ISP can do.

The DSLAM doesn't need a firmware upgrade to do G.INP.
It just needs DLM to load that particular line profile.

If you send the command xdslcmd info --vendor with the HG612 it will return the DSLAM chipset/firmware in use.

I know, this is why I am trying to pursue Openreach, anyway here is the vendor output:

xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 1
Last initialization procedure status:   0
Max:    Upstream rate = 21398 Kbps, Downstream rate = 58716 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 60087 Kbps

ChipSet Vendor Id:      BDCM:0xa48c
ChipSet VersionNumber:  0xa48c
ChipSet SerialNumber:
Logged

j0hn

  • Kitizen
  • ****
  • Posts: 2424
Re: Cabinet 25 DSLAM Installation
« Reply #122 on: June 12, 2019, 02:00:16 PM »

Quote
I know, this is why I am trying to pursue Openreach

My advice would be to wait.
You've already had a DLM reset which would be about all OpenReach could do.
Another DLM reset simply restarts the clock on the wait for DLM to apply G.INP.

Your DSLAM firmware is the standard firmware/line card version in use.
Logged
Plusnet FTTC 80/20 -  ECI now Huawei cab
retx low @ 3dB target SNRM
Zyxel VMG1312-B10A bridged with 1508 MTU + Asus RT-AC68U running Asuswrt-Merlin

gt94sss2

  • Reg Member
  • ***
  • Posts: 869
Re: Cabinet 25 DSLAM Installation
« Reply #123 on: June 14, 2019, 11:07:38 PM »

ChipSet Vendor Id:      BDCM:0xa48c
ChipSet VersionNumber:  0xa48c

There is what I understand different/newer version on some DSLAMS -   BDCM:0xb12d/v0xb12d - but that doesn't affect G.INP functionality

As j0hn says, I would just wait and leave the line alone.
Logged

mentaltom

  • Member
  • **
  • Posts: 72
Re: Cabinet 25 DSLAM Installation
« Reply #124 on: June 14, 2019, 11:11:00 PM »

There is what I understand different/newer version on some DSLAMS -   BDCM:0xb12d/v0xb12d - but that doesn't affect G.INP functionality

As j0hn says, I would just wait and leave the line alone.

Thank you both. Yes, Iíve actually realised that fastpath is active (having read how to tell on other posts) and since Interleaving dropped ping times have dropped from 21 to 8ms, so happy to just leave the line at the moment - solid for 2 weeks now. Just worried if it drops for any other reason than DLM the speed will reduce to below attainable.
Logged
Pages: 1 ... 7 8 [9]
 

anything