Broadband Related > Broadband Hardware

ZyXEL VMG1312-B10A Help Required

<< < (2/5) > >>

johnson:
How odd that the same route settings that allowed access to the HG612 on a different subnet do not work with the 1312.

From your original post:


--- Quote ---Destination network address: 192.168.1.0
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.2
Interface: LAN/br0

--- End quote ---

but the latest:

--- Quote ---Des: 192.168.1.0
Sub: 255.255.255.0
Gate: 0.0.0.0
Default/BR0

--- End quote ---

The gate or gateway has changed between these?

hacktrix2006:
Thanks will give that a shot do i need to set the route up still, yes i have been changing the route to see if i could get it to work but no dice thus far.


--- Code: ---iptables -t nat -I POSTROUTING ! -s 192.168.1.1 -d 192.168.2.1 -j SNAT --to 192.168.2.2

--- End code ---

which ip in that is your bridge and which is your router?? just so i now how to set this up

johnson:
You could try having the Zyxel on the same subnet eg. 192.168.1.10 or similar. I'm not sure if it really needs to be on a separate one.

johnson:

--- Quote from: hacktrix2006 on September 18, 2018, 01:17:59 PM ---Thanks will give that a shot do i need to set the route up still, yes i have been changing the route to see if i could get it to work but no dice thus far.


--- Code: ---iptables -t nat -I POSTROUTING ! -s 192.168.1.1 -d 192.168.2.1 -j SNAT --to 192.168.2.2

--- End code ---

which ip in that is your bridge and which is your router?? just so i now how to set this up

--- End quote ---


This may be over complicating things. Are you trying at the moment with the Zyxel plugged into the WAN port of your Archer VR2600?

hacktrix2006:
Zyxel is in the normal Ethernet ports right now in the archer.

Sent from my LLD-L31 using Tapatalk

Navigation

[0] Message Index

[#] Next page

[*] Previous page