Tiffy what you can do is use your current sync rate for example say 39999kbps if your on RTX-Low/fastpath you take 96.7% of current sync rate 39999kbps which = 38679kbps your IP Profile (38)
If your on RTX-High you take 92.0% of current sync rate 39999kbps which = 36799kbps your IP Profile (37)
So your DS IP Profile would be 96.7 percent of 36906 = 35688kbps IP profile (36)
Back on the original topic.
Yes, I appreciate I can "reverse engineer" my known parameters and work out what my BRAS IP profile "should" be, I know that I am on retx low profile since the last re-synch, however, if you can remember back to a few weeks ago when yourself and j0hn advised me that my IP profile was stuck and I should drop PPP session to reset, I chose to disregard this advice for some time but eventually applied resulting in a substantial DS synch/data throughput increase with the new DS IP profile.
It's nice to know what the BRAS IP profiles actually are as well as what they "should" be by data TP ratio calculation based on retx low/high profiles.