hello
Could you help me according to this config to apply it on the tim with fai free.
if it's possible or not with the dga4132?
Thank you.
This config works on the tplink9970 but I can not get on the tim.(root,firmware 1.1.2, last gui ansuel)
my config in example:
(IP / MAC of the freebox:
66.66.66.29 00: 07: cb: ff: ff: 24)
(IP / MAC gateway:
66.66.66.254 00: 07: cb: ff: 4f: a7)
on the tplink9970
- router mode
- in IPoE
- DHCP for IP
- DNS by DHCP or hard
- Activated VLAN VIF 836
- NAT enabled
On the TP-Link, the modem automatically supports the cloning of the MAC address on the modem interface.
Go to "Network-> MAC Clone", choose the interface ipoe_ptm_836_0_d, and put the MAC address of the freebox (00: 07: cb: ff: ff: 24 with my example).
Regarding the management of the gateway and the ARP, the TP-Link seems to associate itself the IP of the gateway with its MAC address thanks to DHCP.
Basically it is mandatory to enable DHCP with the TP-Link, it allows him to make the link all alone between 66.66.66.254 and 00: 07: cb: ff: 4f: a7.