Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[npr]

Running DSLStats v5.7.3 on a Raspberry Pi.
The new "Errors Averages" screen appears to be working ok, when I change the date the average error data changes accordingly.
What is giving me a problem however, is when I click on the camera icon to save "averages to a text file" I get this:

Average error rates by day

15 Mar 2016
CRC errors per hour: 26.2 Down, 0.80 Up
FEC errors per hour: 41510 Down, 0.85 Up
HEC errors per hour: 219 Down, 0 Up
ES per hour: 3.85 Down, 0.80 Up
SES per hour: 0 Down, 0 Up

14 Mar 2016
CRC errors per hour: 26.2 Down, 0.80 Up
FEC errors per hour: 41510 Down, 0.85 Up
HEC errors per hour: 219 Down, 0 Up
ES per hour: 3.85 Down, 0.80 Up
SES per hour: 0 Down, 0 Up

13 Mar 2016
CRC errors per hour: 26.2 Down, 0.80 Up
FEC errors per hour: 41510 Down, 0.85 Up
HEC errors per hour: 219 Down, 0 Up
ES per hour: 3.85 Down, 0.80 Up
SES per hour: 0 Down, 0 Up

12 Mar 2016
CRC errors per hour: 26.2 Down, 0.80 Up
FEC errors per hour: 41510 Down, 0.85 Up
HEC errors per hour: 219 Down, 0 Up
ES per hour: 3.85 Down, 0.80 Up
SES per hour: 0 Down, 0 Up

11 Mar 2016
No Data

The data for each date being todays error data.

Is this a problem at my end or are others also seeing this?

[roseway]

You're quite right, I see the same. I'll correct it.

[npr]

Thanks Eric, no rush from this end.

[roseway]

just a matter of cramming it into the available space.

If space is the issue..  and I can see that it may well be cramped.   
Adding the figure on the Conn Speed page may be an acceptable solution.      

I can't really fit it into the status bar without degrading the information which is already there, so I've added it to the panel under the connection speed graph (see below). Will this do?

[kitz]

Yes.  Thank you