I upgraded to this new version of the program, so it can display my G.INP data, but I'm encountering a few oddities. Some are probably due to this being the first version for G.INP, but some might be because of problems I've been encountering with power here, which has killed the computer 3 or 4 times.
1. When starting the program, then hitting the "start recording" button, then waiting for the first set of samples, I'd cause a crash. The pop-up window would inform me, and ask if I wanted to continue with the potential of using corrupt data.
If I allowed the program to continue, I could see that the graphs for Hlog and QLN stopped at around tone 250 (and stayed that way forever). The bitloading graph stopped at around the same point (with all bars coloured blue), but would fix itself after the the next sample.
This happened a few times, but it has stopped now, so I can't get a screenshot of the pop-up window. But I do have snapshots of the initial graphs.
2. I always used to have the "SNR per band" graphs ticked, and they'd be included in the tabs. I'd see plenty of variation, too. On starting 5.4.5, this tab seemed to be not present after startup, and needed to be re-configured.
However, when it did appear, I seemed to get one of two behaviours:
a) I get a historical line (coloured for U2 or D3), as though all previous samples were an identical value ... but the new samples start to vary correctly
b) I get the same kind of historical line, but all future sample stay identical - so I get one single straight line (coloured for U2 or D3).
I don't know if (a) is expected, but (b) is definitely wrong ... the same values logged on HMS show variations that ought to be visible.
On my most recent startup, the graph was present as normal, and values were logged independently, correctly.
I'm now wondering if this got affected by a change I made in the "Items to Monitor" screen; by default, (under pbParams), the "autodetect" option is ticked but greyed out, and I have had the "SNRM per band" option ticked. I think that, on first starting 5.4.5, I added a tick to "Stats per band" before starting the recording.
IIRC, I couldn't see any new stats, and I reckon this triggered the "SNRM per band" setting to get mixed up.
3. The G.INP graphs don't follow the configuration of the other graphs
I have my graphs configured to show 8 hours, and a 3-pixel line. The G.INP graphs are 2 hours, with 1-pixel line width.
4. The G.INP graphs don't scroll back-and-forth correctly
I can use the mouse wheel to scroll left and right, but once I've sent the viewport towards the left, I can't get it all the way back to the right.
It does revert to the right at the next sample, though.