yeah its fixing a lot of errors.
Yeap Ronski's work line pumps out 100,000 fec's per minute thats been going for many months it must be some kind of electrical interference for him yet he's not banded just the line won't get moved off interleaving
Ronski isnt Interleaved atm.. despite 100's of thousands of FECs the day before on the 28th the DLM still removed Interleaving. His line if any should be proof that the DLM doesnt care about FECs.
Ronski's had interleaving removed a couple of times now in he past few months. Proof also that as long as you can get MTBE green for sufficient time then the DLM will eventually remove interleaving.
At first he was using the HG612, had had been interleaved for a looooooong time. In Sept he got a Zyxel and it took a while as he came down the various steps, but Interleaving was eventually removed in Oct and it was doing OK.
Unfortunately there was a single and isolated massive noise burst on the 10th of Nov resulting in 2461 E/S which took him just into MTBE red. As a result the DLM applied interleaving yet again. (see attached) The line has been fine since and DLM removed interleaving again on the 28th.
If you notice although the line isnt interleaved atm, its now generating circa 1300 E/S per day but touch wood the DLM is happy with this. Ronski's line seems to perform better with the Zyxel than it did with the HG612 and its just about keeping in MTBE amber, plus giving him a better sync speed. If it hadnt been for that single massive noise burst on the 10th of Nov, then its highly likely that his line would have remained non-interleaved since Oct.