Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[roseway]

Changes since test version v5.0.10:

- fixed program lockup with VDSL2 connections
- fixed incorrect reporting of signal attenuation on VDSL2
- fixed error which could cause some MyDSLWebStats graphs to fail to display
- added MyDSLWebStats option to omit per-tone values (temporary fix for some Linux systems)

Please note that only items which are enabled in "Items to Monitor" will be uploaded to MyDSLWebStats.

Known issues with this version

(Linux only): The system must have curl and libcurl installed. Depending on the curl version, the program may fail to upload the per-tone data (Bitloading, SNR per tone, QLN, HLog) which will result in an error message in the event log every 15 minutes. The last change shown above is a temporary workaround for this issue - with the option enabled, only the regular (per-minute) stats are uploaded. It's possible that some systems may fail to upload altogether - if this happens, please let me know the details of your system and curl version.

(All OS versions): With VDSL2 connections, you may get multiple entries in the attenuation log even though the values haven't changed. This is cosmetic only.

The QLN and HLog graphs don't display upstream and downstream values in different colours.

http://www.s446074245.websitehome.co.uk/downloads.html

[les-70]

      Seems to be working fine so far and it looks to have uploaded to mydslwebstats. 

I was hoping that if HG612 modem stats cooperation was not used but upload to mydslwebstats was enabled then some factions of 60 sec might be possible now you have made DSLstats run very fast( ~3secs for me).e.g. 30sec or 15sec.

[roseway]

Thanks for the report.

At present MyDSLWebStats specifies a minimum time between uploads of one minute, for reasons of server load.

[les-70]

I understand the upload frequency rate need but wondered whether that could be met whilst updating DSLstats locally at a higher rate e.g. DSLstats runs at 30 sec and but uploads every other sample 60 sec.   Only worth considering if it would be very very easy to implement.

[roseway]

Yes, sorry, I realised afterwards that's what you meant. It's certainly possible, and I'll try to fit it in.

[burakkucat]

Seems to be operating and uploading correctly to MyDSLWebStats (including Hlog, QLN, etc). 

[krypton]

It doesn't freeze anymore and it works with mydslwebstats on windows and linux (cURL 7.35.0).

[roseway]

Thank you both.

[NewtronStar]

Very happy to say that v5.0.11 is working well, and I really do appreciate the hard work and the time each software developer put's into there projects to keep us the Users happy.

[kitz]

Working fine here - thanks eric

[roseway]

Thanks all.

[AArdvark]

Just updated and all working well.

Many thanks.

[kitz]

As a test Ive just switched off mydsl webstats in HG612_modem and swapped it over to DSLstats.  Seems good to me

[roseway]

Thank you

[Bald_Eagle1]

As a test Ive just switched off mydsl webstats in HG612_modem and swapped it over to DSLstats.  Seems good to me

I've been running both Eric's & my programs as a test.

DSLStats seems to upload tone data during the minute before the quarter hour wheras my program uploads it in the minute after the quarter hour.


I don't know if this double set of data is causing a problem at the server end, but I have asked if tbailey2 needs me to disable uploading of tone data from one of our programs.