Hi Guys,
So we've had some more users added to our cabinet (neighbours, and I asked the guy who was working on the cabinet). As expected my upload and download speeds have dropped by a couple of Mb.
However, since this, my error counts have seriously reduced. Here are my stats.
# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 10173 Kbps, Downstream rate = 50244 Kbps
Bearer: 0, Upstream rate = 10680 Kbps, Downstream rate = 44698 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 5.8 5.8
Attn(dB): 22.1 0.0
Pwr(dBm): 12.6 6.3
VDSL2 framing
Bearer 0
MSGc: 18 26
B: 51 237
M: 1 1
T: 64 46
R: 12 16
S: 0.0370 0.7083
L: 13832 2869
D: 875 1
I: 64 127
N: 64 254
Counters
Bearer 0
OHF: 113137649 78311
OHFErr: 1828 124
RS: 3193327813 3333271
RSCorr: 5151325 201
RSUnCorr: 175020 0
Bearer 0
HEC: 42503 0
OCD: 1773 0
LCD: 1773 0
Total Cells: 1648901793 0
Data Cells: 375161419 0
Drop Cells: 0
Bit Errors: 0 0
ES: 198 118
SES: 3 0
UAS: 23 23
AS: 269073
Bearer 0
INP: 3.00 0.00
INPRein: 0.00 0.00
delay: 8 0
PER: 2.37 8.17
OR: 80.73 31.30
AgR: 44779.08 10711.26
Bitswap: 179265/179265 12070/12070
# xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 10170 Kbps, Downstream rate = 50760 Kbps
Bearer: 0, Upstream rate = 10680 Kbps, Downstream rate = 44698 Kbps
Discovery Phase (Initial) Band Plan
US: (7,32) (871,1205) (1972,2782)
DS: (33,859) (1216,1961) (2793,3970)
Medley Phase (Final) Band Plan
US: (7,32) (871,1205) (1972,2496)
DS: (33,859) (1216,1961) (2793,3403)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 10170 kbps 50760 kbps
Actual Aggregate Tx Power: 6.3 dBm 12.6 dBm
====================================================================================
VDSL Band Status U0 U1 U2 U3 U4 D1 D2 D3
Line Attenuation(dB): 6.8 35.5 53.4 N/A N/A 16.9 43.6 67.8
Signal Attenuation(dB): 6.8 34.8 51.4 N/A N/A 25.1 43.3 68.6
SNR Margin(dB): 5.7 5.8 5.8 N/A N/A 5.9 5.9 5.9
TX Power(dBm): 0.2 -7.4 4.6 N/A N/A 9.8 7.9 3.6
Do we think these errors are low enough for DLM to start taking off interleaving/INP or not?
Why would adding more lines to the cabinet make me more stable error wise?