Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: How do you extract firmware from ECI/r?  (Read 1413 times)

custard

  • Member
  • **
  • Posts: 83
    • Geeky Dentist
How do you extract firmware from ECI/r?
« on: June 17, 2014, 05:53:50 PM »
I've had an issue with my ECI/r recently. I have recently flashed the file uploaded by Asbokid (ecibfocus_r.8mb.bin) which is used for reverting back to the original configuration.

As that firmware is for version 1(2012) and mine is a version 2(2013), i think it is causing my modem not to work correctly causing a hefty increase in latency.

I was hoping to extract the firmware from another eci/r version 2 that i have, but needs some guidance on how to go about this.

Any help is much appreciated.

Logged

custard

  • Member
  • **
  • Posts: 83
    • Geeky Dentist
Re: How do you extract firmware from ECI/r?
« Reply #1 on: June 17, 2014, 09:13:29 PM »
A bit of digging and I've found the relevant post.

http://forum.kitz.co.uk/index.php?topic=11818.msg237137#msg237137

I'd be grateful if someone who has an ECI/r version 2 already soldered up would be able to extract the 8mb bin using the method mentioned in the link. If not, i'll post my file once I get a chance to resolder my other ECI/r.
Logged