Boot Module Debug Flag : 00
It is F1000
Yes I flashed the boot loader before as you suggested but after that the mac address changed to 00.... Before flashing boot loader the mac was fine.
Same error
So you flashed the new bootloader without ever having unlocked the device. I know this because of
Boot Module Debug Flag : 00
We had a lengthy exchange, you and I, on the need to do the commands listed in the instructions but you decided not to despite our subsequent discussion. This command is particular sets DEBUG mode. You only need to do it once ever:
ATWZ EC43F6470F58, 01, 01, 00, 0C <---- Set MAC addr, Country, EngDbgFlag, FeatureBit, # of MACs
You may appreciate that I feel somewhat frustrated, having spent considerable time on this with you. 10 days ago I wrote:
If you did not set Debug mode, as per the instructions, you have not unlocked the bootloader.
Now, I really dont know how to help you. The ATSE command is listed on your F1000 but it wont accept either product name. Try:
ATEN 1, 10F0A563
but I doubt it will work.
I attach a PDF with a complete log of the unlock of an Eircom F1000 as well as the bootloader and firmware update in the hope that others will avoid your fate.