Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[roseway]

When a new 24-hour period starts, it takes some time before the averages start to register, particularly if your error rates are rather low. I don't know if that's the explanation in your case.

I'm aware that this function isn't perfect, and I need to give it some more attention, but for the moment it doesn't have a high priority.

[broadstairs]

When a new 24-hour period starts, it takes some time before the averages start to register, particularly if your error rates are rather low. I don't know if that's the explanation in your case.

I'm aware that this function isn't perfect, and I need to give it some more attention, but for the moment it doesn't have a high priority.

That might well explain it Eric, no worries just thought I'd mention it seems fine now but it was just I'd never seen it before 

Stuart

[kitz]

Works 'straight out of the box' with a Zyxel WMG8324.  Nice one eric :clap2:

Only thing Ive noticed is the colouring of the vdsl tones for the first 4 bands are either blue or purple

eg



PS just thought...  you may want these?

Discovery Phase (Initial) Band Plan
US: (6,31) (882,1193) (1984,2770)
DS: (33,857) (1218,1959) (2795,4083)

[roseway]

I'll check that out. It looks like an uncomplicated band plan with no overlapping bands, but clearly something isn't right.

Could you show me the medley phase as well please?

[kitz]

Here you go

Medley Phase (Final) Band Plan
US: (6,31) (882,1193) (1984,2770)
DS: (41,857) (1218,1959) (2795,4083)

[roseway]

Thanks, I'll have a look at it.

(Not a lot different, is it? )

[kitz]

I had dslstats working fine earlier -  until I changed the routers default password.

I cant seem to change it in dslstats gui though and it keeps saying incorrect login name or password when it attempts to telnet.    The password in dslstats seems to keep going back to the default, & Ive also had a floating point error.

I could be wrong, but it doesnt look like changing the password in the gui saves it to the ini file.

---
added
  I had the bright idea of attempting to change the.ini but that doesnt work as it looks like its encrypted.

I also cant change the password back to the default in the Zyxel,  as it wont accept it "The password must contain 6 to 256 characters"

[roseway]

You probably can't change the password while DSLstats is recording (I'll have to check that) but you should be able to change it if you stop recording first. Failing that, you really should be able to change it if you stop recording, then close down DSLstats and restart it. Make sure that you don't have it configured to start recording automatically on startup.

I'll put this on the list for investigation, but in the meantime, I'm sure it will work if you start it up without starting recording.

[kitz]

You probably can't change the password while DSLstats is recording (I'll have to check that) but you should be able to change it if you stop recording first.

 Make sure that you don't have it configured to start recording automatically on startup.

That did the trick thank you

[roseway]

I do need to smarten that up a bit.

[broadstairs]

Eric could you possibly add some more options for alerts? Currently I dont use the SNRM alert but presume it writes to the event log (with a time stamp) if no email is selected.

I am seeing some spikes in CRCs and FECs which I would like to be able to track more easily in the log so perhaps an option for CRCs or FECs over a certain value. It would help me see the timing of these events and whether or not they happen at the exact same recording sample and make it easier hopefully to track down the cause.

Stuart

[roseway]

Stuart, currently the alerts don't do anything unless you tick the option "Send email notification of events". Your suggestion of an alternative option to send them to the event log is a good one. And adding more triggers is easy enough to do. I'll include this in the next release.

[broadstairs]

Stuart, currently the alerts don't do anything unless you tick the option "Send email notification of events". Your suggestion of an alternative option to send them to the event log is a good one. And adding more triggers is easy enough to do. I'll include this in the next release.

Thanks Eric, look forward to it.

Stuart

[roseway]

Only thing Ive noticed is the colouring of the vdsl tones for the first 4 bands are either blue or purple

I think I've fixed this. The band detection logic was confused by an unusual value in the SNR margin section of your pbParams output - the U0 value is shown as 'NR' (what does that mean?). The result was that it believed that band U0 wasn't being used. I've corrected this, and you can download the corrected version at http://www.s446074245.websitehome.co.uk/files/dslstats32W-4.50.2.zip . This is the full archive, but you only need to replace the executable dslstats.exe.

By the way, this version also fixes the other issue you reported. It's now not possible to edit the login details while recording is in process; you have to stop or pause recording first.

Please test this version and (hopefully) confirm that the band colours are now correct.

[Jakecat]

I have this running nicely with a Zoom X4 5751. The only issue I have is a lack of bit loading information. The modem returns

adsl info --Bits
adsl: ADSL driver and PHY status
Status: Showtime  Retrain Reason:       4
Channel: INTR, Upstream rate = 448 Kbps, Downstream rate = 4928 Kbps
Tone number      Bit Allocation
>

I guess this is probably a firmware problem on the modem.