Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[DEADLY-TDG-]

Link Information
         
Uptime:   3 days, 7:56:22
DSL Type:   G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:   1,256 / 7,177
Data Transferred (Sent/Received) [kB/kB]:   0.00 / 0.00
Output Power (Up/Down) [dBm]:   12.0 / 16.5
Line Attenuation (Up/Down) [dB]:   26.0 / 44.5
SN Margin (Up/Down) [dB]:   6.5 / 8.0
Vendor ID (Local/Remote):   TMMB / BDCM
Loss of Framing (Local/Remote):   0 / 0
Loss of Signal (Local/Remote):   0 / 0
Loss of Power (Local/Remote):   0 / 0
Loss of Link (Remote):   0
Error Seconds (Local/Remote):   11 / 0
FEC Errors (Up/Down):   2,626 / 0
CRC Errors (Up/Down):   2,626 / 9,607
HEC Errors (Up/Down):   11,629 / 5,258



Ok i know you could tell interleaving was off by looking at the FEC, is it off? I cnnot remember what it had to be...

But what about those other errors? those ok??? i've seen a guy with 0 errors "up" on all  except FEC maybe.


Also i need the BE username and Pass to login since i want to use a Netgrear router at somepoint, are those within the modem (if so how do i get them) or are they the settings i set when i signed up with BE?

[kitz]

FEC errors indicate the line has interleaving applied.

Strange that the FEC and CRC are exactly the same.. .  Ive noticed with my own connection that the upstream errors dont always clear and continue to rack up.

[kitz]

Details you may need
http://www.kitz.co.uk/isp/beO2setup.htm

From the netgear pages


Basic Settings Page

Does Your Internet Connection Require A Login?  = No
Account Name  (If Required) = Leave Blank 
Domain Name  (If Required)  = Leave Blank 

Internet IP Address  = Use Static IP Address and enter in the details of the IP address Be has given you.
Enter the DNS Servers



ADSL settings Page

Multiplexing - LLC Based
VPI 0
VCI 101

[DEADLY-TDG-]

So any FEC errors on either up or down means i'm on interleaved?, i thought it might be just down.

[kitz]

>> i thought it might be just down

erm... Yes...  Good point!   

>> Strange that the FEC and CRC are exactly the same.

Ive just had a quick browse around and noticed that on several Be connections, the upstream CRC's and FECs record exactly the same.

My own line which isnt interleaved shows
FEC Errors (Up/Down):   0 / 0

[DEADLY-TDG-]

Ive just had a quick browse around and noticed that on several Be connections, the upstream CRC's and FECs record exactly the same.

I wonder why that is..

Anyway i switched to my netgear router, thanks for help there! My ping went down from 30 to 15-16, and it does load quicker into the games i play.

I then tested for interleaving as shown by your guide for netgear routers, it is definatly off.



Thank You!

[kitz]

I'm not sure.

I do however think there is something on the Be MSANs which retain a record up the upstream errors. I spent a long time looking into how to try clear these stats on the ST routers and nothing seemed to work.

It wasnt until I put a Netgear DG834GT on my own line that I noticed that the upstream error counts had been carried across to the Netgear router too, therefore the count must be being retained somewhere by Be's equipment.