Topic: Capping my line to try and remove interleaving (Read 7374 times)

adslmax · « **Reply #30 on:** February 15, 2018, 06:43:53 PM »

I seen some lines with Line Attenuation is over 14 dB and still getting full max sync rate with G.INP on it via MDWS (Quik UP)

V_R · « **Reply #31 on:** February 17, 2018, 06:52:47 PM »

Right then, there has still been no change. What should I do?

1. Leave the line as it is?
or
2. Re apply a cap of about 40Mb down and see if I can force G.INP again?

As per sig, I'm .Sam. on MDWS.

Cheers.

adslmax · « **Reply #32 on:** February 17, 2018, 06:54:45 PM »

Leave it alone let the DLM do it

KingJ · « **Reply #33 on:** February 18, 2018, 07:13:12 PM »

It's been almost a week since your powercut now, and the line hasn't resynced. I would think that if DLM was going to take action, it would have done so by now.

I would personally suggest waiting until Monday evening (so there's >7 days since the last resync), and then starting over again - reapplying the aggressive cap, waiting for fast path, uncapping, waiting for G.INP etc..

adslmax · « **Reply #34 on:** February 19, 2018, 09:42:26 PM »

.Sam. UP - it look like DLM haven't decided yet on your line to get G.INP enabled as I do think the small power cut has ruined it. Maybe u try to get capped at 40Meg and what happen from there.

V_R · « **Reply #35 on:** February 28, 2018, 05:07:29 PM »

So I've left it alone for all this time and nothing has happened at all. No DLM, no G.INP. On the plus side, the connection has held at ~2dB all this time which is a result.

News:

Author Topic: Capping my line to try and remove interleaving (Read 7374 times)

adslmax

Re: Capping my line to try and remove interleaving

V_R

Re: Capping my line to try and remove interleaving

adslmax

Re: Capping my line to try and remove interleaving

KingJ

Re: Capping my line to try and remove interleaving

adslmax

Re: Capping my line to try and remove interleaving

V_R

Re: Capping my line to try and remove interleaving