Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: HG612 telnet problem  (Read 3647 times)

lawes84

  • Just arrived
  • *
  • Posts: 4
HG612 telnet problem
« on: October 21, 2017, 01:10:00 PM »

I've unlocked the HG612
but when i telnet to get stats, all i get is a '^'

telnet> o 192.168.1.1
Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.

Welcome Visiting Huawei  Home Gateway
Copyright by Huawei Technologies Co., Ltd.
Login:admin
Password:
ATP>xdslcmd info --stats
    ^
ATP>

Logged

smf22

  • Member
  • **
  • Posts: 48
Re: HG612 telnet problem
« Reply #1 on: October 21, 2017, 01:19:15 PM »

The 'sh' at the prompt and you should then get a hash (#) prompt where you can enter the commands.
Logged
BT FTTC 80/20 Huawei Cab - Zyxel VMG8924-B10A bridge mode + Ubiquiti EdgeRouter X

lawes84

  • Just arrived
  • *
  • Posts: 4
Re: HG612 telnet problem
« Reply #2 on: October 21, 2017, 01:38:16 PM »

Thanks.

We switched to talktalk a few weeks ago and once connected we was getting 72mpbs speedtest download, and router said 79999mpbs max speed.

After a couple of weeks, router says 55555mpbs and speedtest peaks at 54000mpbs.

I've gone back to using the hg612 because it was always stable.....

Can anyone help make sense of these stats?

thanks


# xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason:   0
Last initialization procedure status:   0
Max:   Upstream rate = 35707 Kbps, Downstream rate = 93528 Kbps
Bearer:   0, Upstream rate = 18998 Kbps, Downstream rate = 53796 Kbps

Discovery Phase (Initial) Band Plan
US: (7,32) (871,1205) (1972,2782)
DS: (33,859) (1216,1961) (2793,3959)
Medley Phase (Final) Band Plan
US: (7,32) (871,1205) (1972,2782)
DS: (33,859) (1216,1961) (2793,3959)
        VDSL Port Details        Upstream        Downstream
Attainable Net Data Rate:       35707 kbps          93528 kbps
Actual Aggregate Tx Power:      -   6.6 dBm           13.6 dBm
====================================================================================
   VDSL Band Status      U0      U1      U2      U3      U4      D1      D2      D3
  Line Attenuation(dB):    3.9    10.9    13.8     N/A     N/A    5.5    12.4    18.7   
Signal Attenuation(dB):    3.9    10.2    13.1     N/A     N/A    6.6    12.4    18.7   
      SNR Margin(dB):    12.1    12.1    12.0     N/A     N/A    12.6    12.6    12.6   
       TX Power(dBm):   -20.9   -32.1   -6.9     N/A     N/A    10.7    7.9    6.9   





# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason:   0
Last initialization procedure status:   0
Max:   Upstream rate = 35707 Kbps, Downstream rate = 93756 Kbps
Bearer:   0, Upstream rate = 18998 Kbps, Downstream rate = 53796 Kbps

Link Power State:   L0
Mode:         VDSL2 Annex B
VDSL2 Profile:      Profile 17a
TPS-TC:         PTM Mode(0x0)
Trellis:      U:ON /D:ON
Line Status:      No Defect
Training Status:   Showtime
      Down      Up
SNR (dB):    12.6       12.0
Attn(dB):    9.8       0.0
Pwr(dBm):    13.6      -6.6
         VDSL2 framing
         Bearer 0
MSGc:      14      30
B:      35      24
M:      1      1
T:      64      64
R:      16      14
S:      0.0213      0.0418
L:      19536      7466
D:      1527      535
I:      52      39
N:      52      39
         Counters
         Bearer 0
OHF:      1351317      575576
OHFErr:      0      0
RS:      432236207      1972006
RSCorr:      6      4039
RSUnCorr:   0      0

         Bearer 0
HEC:      0      0
OCD:      0      0
LCD:      0      0
Total Cells:   239021227      0
Data Cells:   1609141      0
Drop Cells:   0
Bit Errors:   0      0

ES:      0      0
SES:      0      0
UAS:      26      26
AS:      2309

         Bearer 0
INP:      5.00      4.00
INPRein:   0.00      0.00
delay:      8      5
PER:      1.71      4.02
OR:      93.55      71.50
AgR:      53889.18   19069.10

Bitswap:   18/18      5/5






# xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason:   0
Last initialization procedure status:   0
Max:   Upstream rate = 35711 Kbps, Downstream rate = 93756 Kbps
Bearer:   0, Upstream rate = 18998 Kbps, Downstream rate = 53796 Kbps

Link Power State:   L0
Mode:         VDSL2 Annex B
VDSL2 Profile:      Profile 17a
TPS-TC:         PTM Mode(0x0)
Trellis:      U:ON /D:ON
Line Status:      No Defect
Training Status:   Showtime
      Down      Up
SNR (dB):    12.6       12.1
Attn(dB):    9.8       0.0
Pwr(dBm):    13.6      -6.6
         VDSL2 framing
         Bearer 0
MSGc:      14      30
B:      35      24
M:      1      1
T:      64      64
R:      16      14
S:      0.0213      0.0418
L:      19536      7466
D:      1527      535
I:      52      39
N:      52      39
         Counters
         Bearer 0
OHF:      1370614      583570
OHFErr:      0      0
RS:      438410992      746683
RSCorr:      6      4039
RSUnCorr:   0      0

         Bearer 0
HEC:      0      0
OCD:      0      0
LCD:      0      0
Total Cells:   242434712      0
Data Cells:   1632482      0
Drop Cells:   0
Bit Errors:   0      0

ES:      0      0
SES:      0      0
UAS:      26      26
AS:      2342

         Bearer 0
INP:      5.00      4.00
INPRein:   0.00      0.00
delay:      8      5
PER:      1.71      4.02
OR:      93.55      71.50
AgR:      53889.18   19069.10

Bitswap:   18/18      5/5

Total time = 39 min 28 sec
FEC:      6      4039
CRC:      0      0
ES:      0      0
SES:      0      0
UAS:      26      26
LOS:      0      0
LOF:      0      0
LOM:      0      0
Latest 15 minutes time = 9 min 28 sec
FEC:      0      1224
CRC:      0      0
ES:      0      0
SES:      0      0
UAS:      0      0
LOS:      0      0
LOF:      0      0
LOM:      0      0
Previous 15 minutes time = 15 min 0 sec
FEC:      3      617
CRC:      0      0
ES:      0      0
SES:      0      0
UAS:      0      0
LOS:      0      0
LOF:      0      0
LOM:      0      0
Latest 1 day time = 39 min 28 sec
FEC:      6      4039
CRC:      0      0
ES:      0      0
SES:      0      0
UAS:      26      26
LOS:      0      0
LOF:      0      0
LOM:      0      0
Previous 1 day time = 0 sec
FEC:      0      0
CRC:      0      0
ES:      0      0
SES:      0      0
UAS:      0      0
LOS:      0      0
LOF:      0      0
LOM:      0      0
Since Link time = 39 min 1 sec
FEC:      6      4039
CRC:      0      0
ES:      0      0
SES:      0      0
UAS:      0      0
LOS:      0      0
LOF:      0      0
LOM:      0      0
Logged

Dray

  • Kitizen
  • ****
  • Posts: 2361
Re: HG612 telnet problem
« Reply #3 on: October 21, 2017, 02:06:23 PM »

Use this telnet command to find out the type of cabinet you're connected to

xdslcmd info --vendor
Logged

lawes84

  • Just arrived
  • *
  • Posts: 4
Re: HG612 telnet problem
« Reply #4 on: October 21, 2017, 03:14:05 PM »

# xdslcmd info --vendor
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason:   0
Last initialization procedure status:   0
Max:   Upstream rate = 35684 Kbps, Downstream rate = 93756 Kbps
Bearer:   0, Upstream rate = 18998 Kbps, Downstream rate = 53796 Kbps

ChipSet Vendor Id:   BDCM:0xa48c
ChipSet VersionNumber:   0xa48c
ChipSet SerialNumber:   
Logged

lawes84

  • Just arrived
  • *
  • Posts: 4
Re: HG612 telnet problem
« Reply #5 on: October 21, 2017, 03:39:30 PM »



current speedtest using ethernet plugged into the hg612.

Logged

j0hn

  • Kitizen
  • ****
  • Posts: 4099
Re: HG612 telnet problem
« Reply #6 on: October 21, 2017, 03:49:32 PM »

Should definitely be getting full 80Mb.
93Mb attainable and 9.8dB attention shows you're pretty close to your cabinet which is a Huawei, which is good.

You got quite high interleaving applied at the moment. In the next few weeks DLM should apply retransmission (G.INP).

Is the downstream sync rate always 53796? Very odd that is syncing so low. I recommend installing DslStats and registering for an account on MyDSLWebStats. This lets everyone see detailed graphs of your connection and will help get to the bottom of the low sync. It should be up at 79999  for sure.
Logged
Talktalk FTTP 550/75 - Speedtest - BQM

Dray

  • Kitizen
  • ****
  • Posts: 2361
Re: HG612 telnet problem
« Reply #7 on: October 21, 2017, 07:07:44 PM »

I would guess the modem you were using instead of the HG612 caused a lot of disconnections resulting in your line being banded to raise the SNRM to 12. Assuming the HG612 stops the disconnections, your line should improve in the next 10-15 days.
Logged
 

anything