Hi !
@Lil-KobyHere is how to safely use the latest Firmware
AGTEF_1.1.0_002_CLOSED.rbi (and test the latest DSL driver
).
1) from your actual firmware, with Winscp, delete both folders
/overlay/bank_1 and
/overlay/bank_22) with AutoFlashGui, flash the latest Firmware
AGTEF_1.1.0_002_CLOSED.rbi (no need to try to root it)
3) once the new firmware is flashed and the modem finished to reboot, with AutoFlashGui downgrade to
AGTEF_1.0.3_CLOSED.rbi4) Now you have one Passive Bank with firmware
1.1.0_002 and one active bank with
Firmware 1.0.35) So you are now on Firmware
1.0.3, do the Root process with AutoFlashGui.
6) With putty you can now check which is the inactive bank, the inactive bank is where the Firmware 1.1.0 is installed.
do a
cat /proc/banktable/inactive7) so let's say your inactive bank is
bank_1, then we are going to edit some files in
/overlay/bank_1/etc/ to enable the root.
8) in
/overlay/bank_1/etc/passwd and
/overlay/bank_1/etc/passwd- overwrite the first line with :
root:x:0:0:root:/root:/bin/ash9) in
/overlay/bank_1/etc/shadow and
/overlay/bank_1/etc/shadow- overwrite the first line with what you have in
/etc/shadow and
/etc/shadow-10) in
/overlay/bank_1/etc/config/dropbearconfig dropbear 'lan'
option IdleTimeout '600'
option PasswordAuth 'on'
option Port '22'
option Interface 'lan'
option RootPasswordAuth 'on'
option enable '1'
config dropbear 'wan'
option enable '0'
option IdleTimeout '600'
option PasswordAuth 'on'
option Port '22'
option Interface 'wan'
11) ok, so now from putty you can do a
switchover, this will switch you on the other bank and reboot the modem on firmware 1.1.0 Rooted
12) now you can configure your network in
/etc/config/network The modded GUI is not working with Firmware 1.1.0, someone tried and he said it was crashing.