Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: Vectoring  (Read 589 times)

nivek1612

  • Member
  • **
  • Posts: 74
Vectoring
« on: November 10, 2017, 08:26:32 AM »

Its been applied to my line - and its made a huge difference to the DS

Is there anyway to get it on the US as well ? I'm assuming its not on by default as my US is no different
Logged
Life is what happens while you're making plans

OPNsense  17.7.11 on Qotom  i5-5250U with Zen FTTC 80/20

gazaai

  • Reg Member
  • ***
  • Posts: 199
Re: Vectoring
« Reply #1 on: November 10, 2017, 09:32:22 AM »

As far as I am aware there is nothing you can do to get it on the upstream unfortunately. I assume DLM will be very similar to the way G.INP acts so most users will only see it on the Downstream as there upload is stable enough.

Also your line is looking good on MyDSLWebStats, I noticed your G-INP Bearer 0 INP dropped to 0 again on the 6th so I assume you will be pleased with that as you will have a faster IP profile now. If you are unsure of why its a bad thing being on 1 see the discussion here: http://forum.kitz.co.uk/index.php/topic,20307.0.html

Hopefully more people will see Vectoring being activated soon :fingers:
Logged
Plusnet: 80 / 20
MDWS Username: GaZaai

Modem: Billion 8800NL (Bridge Mode)
Router + AP: NETGEAR R7800 (OpenWRT/LEDE)
APs: 2x Linksys Linksys EA6700

gazaai

  • Reg Member
  • ***
  • Posts: 199
Re: Vectoring
« Reply #2 on: November 10, 2017, 11:17:37 AM »

tbailey2 Yes vectoring was enabled on the Downstream for him on the 13th but I think hes interested to know if hell be getting it enabled for the upstream as well.
Logged
Plusnet: 80 / 20
MDWS Username: GaZaai

Modem: Billion 8800NL (Bridge Mode)
Router + AP: NETGEAR R7800 (OpenWRT/LEDE)
APs: 2x Linksys Linksys EA6700

gazaai

  • Reg Member
  • ***
  • Posts: 199
Re: Vectoring
« Reply #3 on: November 16, 2017, 10:08:09 AM »

@kwillers
Having a look at your line on MyDSLWebStats the FEC rate is going crazy you are getting almost 2 million a minute as far as I can tell.
What is going on here?
Logged
Plusnet: 80 / 20
MDWS Username: GaZaai

Modem: Billion 8800NL (Bridge Mode)
Router + AP: NETGEAR R7800 (OpenWRT/LEDE)
APs: 2x Linksys Linksys EA6700