Chat > Tech Chat
Adva FSP150CP Manual Required
burakkucat:
Does anyone have (access to) a copy of the (user) manual for an Adva FSP150CP that they could share, please? An electronic copy, PDF format, would be perfectly usable.
The label, affixed to the rear of the device, tantalisingly states "Please read the manual provided."
As all my searches, to date, have ended in failure, I turn to fellow Kitizens in the hope that someone may be able to assist.
WWWombat:
Been buying some ex-EAD kit?
I can't help directly, but can offer some reading material in the meantime...
This document shows a bit more of the family:
http://www.fujitsu.com/downloads/TEL/fnc/datasheets/FSP150ds.pdf
I get the impression that the 150CP has ended up being replaced by some variant of the 150CC, and they appear to do very similar jobs ... but a few alternative connectors.
And I did find a manual for the 150CCf-825:
http://medusa.noanet.net/bin/CCf825_INST_OPS%20R1%5B1%5D.2.pdf
There is also a Quick Start guide on scribd, but it needs you to join...
https://www.scribd.com/document/253218471/Manual-ADVA-FSP-150CC-825
burakkucat:
--- Quote from: WWWombat on March 18, 2017, 01:37:29 AM ---Been buying some ex-EAD kit?
--- End quote ---
Indeed! (At a cost of £0-99, plus delivery to local Argos, who wouldn't?) :D
[youtube]YxiyXbjoTSA[/youtube]
If the video is paused at the following times -- 2m 16s, 2m 45s, 3m 00s - 3m 24s, 4m 56s & 7m 02s -- interesting images will be seen.
--- Quote ---I can't help directly, but can offer some reading material in the meantime...
This document shows a bit more of the family:
http://www.fujitsu.com/downloads/TEL/fnc/datasheets/FSP150ds.pdf
I get the impression that the 150CP has ended up being replaced by some variant of the 150CC, and they appear to do very similar jobs ... but a few alternative connectors.
And I did find a manual for the 150CCf-825:
http://medusa.noanet.net/bin/CCf825_INST_OPS%20R1%5B1%5D.2.pdf
There is also a Quick Start guide on scribd, but it needs you to join...
https://www.scribd.com/document/253218471/Manual-ADVA-FSP-150CC-825
--- End quote ---
Thank you for those links. From my research, it appears that the FSP150CP is an Adva special for the BT Group.
My current quest is to discover the credentials required for access via the Management Serial port and, subsequently, how to modify the existing configuration.
With a "null modem" cable from the FSP150CP's serial port to my laptop computer, I invoke screen -L -U /dev/ttyS0 57600 and then power-on the device.
--- Code: ---
Booting ...
HW is 0006
Verifying flash image
Configuring FPGA
Interrogating EEPROM
Clearing SDRAM
Initialising forwarding engine
Initialising CPLD
Initialising H/W devices
Initialising clock
Initialising LM80
Testing LEDs
Initialising traffic management
Initialising PHYs
Initialising packet interface
System Compiled Aug 4 2008 16:21:53
FSP150 v2.6.1.6
Login : admin
Password : *****
Login incorrect
Login :
--- End code ---
It is almost a reflex reaction to enter admin/admin at a login/password prompt pairing. ;)
I have tried all variants that I can think of, based on the information printed on the label shown in the second of the two images, attached to my earlier post, and also the handwritten Circuit No & SNEID from the other front panel label.
WWWombat:
That's certainly some interesting kit to play with. I saw that video (or one like it) quite recently.
As it happens, I also found this page when I was looking:
http://www.rainsbrook.co.uk/wiki/doku.php/rb/adva-fsp150
That shows the default user/password, and a way to reset the box back to the default. Still the wrong box, though.
User: Root
Passwd: ChgMeNOW
This doc (on scribd) has more info for the CC box too:
https://www.scribd.com/document/204701537/Adva-Training-FSP-150CC-GE20x-R4-x-Course-2-Administration
As luck would have it, the visible pages happen to confirm 3 userid to try:
User: root
User: netadmin
User: user
Passwd: ChgMeNOW
WWWombat:
--- Quote from: burakkucat on March 18, 2017, 05:40:05 PM ---My current quest is ...
--- End quote ---
I should ask ... do they provide a working link right now? Or do you need to get to the console to get it working?
Navigation
[0] Message Index
[#] Next page
Go to full version