Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 [2] 3 4

Author Topic: just out of interest  (Read 1604 times)

Black Sheep

  • Helpful
  • Kitizen
  • *
  • Posts: 4300
Re: just out of interest
« Reply #15 on: February 14, 2017, 01:26:34 PM »

an engineer did say but even with out that I have the sea to the west , and at least 6-7 miles of open fields in all other directions which include the exchange and the only thing above ground excluding the odd house and byre are electric poles

We (Openreach) have permission to attach flying wires to Electric poles, known as JUP's (Joint User Poles). With the exception of the North West, whereby existing faulty wires can be replaced, but no additional wires can be attached.
Logged

Ronski

  • Helpful
  • Kitizen
  • *
  • Posts: 2060
Re: just out of interest
« Reply #16 on: February 14, 2017, 01:29:20 PM »

He thinks he has a UG feed from the exchange  :hmm: .

The idea was, wind blows, pole moves slightly in the ground, moving cable close to the pole, more plausible if it's a telegraph pole with cables running up it.

If he's got windmills nearby it may be worth monitoring the voltage, there was somebody who had problems and it was when the wind was stronger and the voltage increased.
Logged

noddy

  • Reg Member
  • ***
  • Posts: 150
Re: just out of interest
« Reply #17 on: February 14, 2017, 06:16:31 PM »

We (Openreach) have permission to attach flying wires to Electric poles, known as JUP's (Joint User Poles). With the exception of the North West, whereby existing faulty wires can be replaced, but no additional wires can be attached.
interesting I'll have to investigate 
Logged

noddy

  • Reg Member
  • ***
  • Posts: 150
Re: just out of interest
« Reply #18 on: February 14, 2017, 07:42:37 PM »

oh another thing the router runs off a UPS
Logged

Ronski

  • Helpful
  • Kitizen
  • *
  • Posts: 2060
Re: just out of interest
« Reply #19 on: February 14, 2017, 07:55:20 PM »

Does the ups log the mains voltage?
Logged

noddy

  • Reg Member
  • ***
  • Posts: 150
Re: just out of interest
« Reply #20 on: February 14, 2017, 08:03:28 PM »

it doesn't keep a log ( as far as I've found ) but does show live data which at present is fluctuating between 242 and 244
Logged

tickmike

  • Kitizen
  • ****
  • Posts: 2962
  • Yes Another Penguin !. :)
    • Free Download from.
Re: just out of interest
« Reply #21 on: February 15, 2017, 01:11:02 AM »

Can you try DSLstats we need to see more graphs.
Then if you get any like your first graph of 13 Feb would need to see 'SRN Margin', 'Speed', 'Errors' graphs run for 24hrs so we can see what's going on .

My theory you have a developing HR joint
Logged
I RECOMMEND TRYING / USING PCLinuxOS (www.pclinuxos.com) .
I have a set of 8 fixed IP's From my Eclipse isp.
BT ADSL2 line>HG612 set as a Modem, Bridge, WAN not Bound to LAN1 or 2 >Smoothwall (Hardware Firewall and routing) > Ethernet LAN, DMZ,WiFI LAN and Spare LAN .
DSLstats LAN2  linked Ethernet

noddy

  • Reg Member
  • ***
  • Posts: 150
Re: just out of interest
« Reply #22 on: February 15, 2017, 09:07:39 AM »

got dslstats running  :) just getting the hang of it ( I think  ;) )
Logged

tickmike

  • Kitizen
  • ****
  • Posts: 2962
  • Yes Another Penguin !. :)
    • Free Download from.
Re: just out of interest
« Reply #23 on: February 15, 2017, 11:44:18 AM »

 :)
I find for me on 'Linux' Eric (roseway) did a very good job.
Logged
I RECOMMEND TRYING / USING PCLinuxOS (www.pclinuxos.com) .
I have a set of 8 fixed IP's From my Eclipse isp.
BT ADSL2 line>HG612 set as a Modem, Bridge, WAN not Bound to LAN1 or 2 >Smoothwall (Hardware Firewall and routing) > Ethernet LAN, DMZ,WiFI LAN and Spare LAN .
DSLstats LAN2  linked Ethernet

noddy

  • Reg Member
  • ***
  • Posts: 150
Re: just out of interest
« Reply #24 on: February 15, 2017, 02:06:19 PM »

very calm day today no wind  :)
Logged

noddy

  • Reg Member
  • ***
  • Posts: 150
Re: just out of interest
« Reply #25 on: February 15, 2017, 02:07:33 PM »

more :)
Logged

noddy

  • Reg Member
  • ***
  • Posts: 150
Re: just out of interest
« Reply #26 on: February 15, 2017, 02:08:09 PM »

adsl info --stats
adsl: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 1
Max:    Upstream rate = 1056 Kbps, Downstream rate = 4000 Kbps
Channel:        INTR, Upstream rate = 448 Kbps, Downstream rate = 3712 Kbps

Link Power State:       L0
Mode:                   G.DMT
TPS-TC:                 ATM Mode
Trellis:                ON
Line Status:            No Defect
Training Status:        Showtime
                Down            Up
SNR (dB):        12.9            20.0
Attn(dB):        56.0            31.5
Pwr(dBm):        19.2            12.5
                        G.dmt framing
K:              117(0)          15
R:              16              16
S:              2               8
D:              16              4
                        Counters
SF:             7614657         7614775
SFErr:          44              0
RS:             258898350               64725587
RSCorr:         1454176         0
RSUnCorr:       228             0

HEC:            35              0
OCD:            0               0
LCD:            0               0
Total Cells:    1133258233              0
Data Cells:     14558867                0
Drop Cells:     10
Bit Errors:     0               0

ES:             1040            0
SES:            20              0
UAS:            80              80
AS:             129453

INP:            1.02            1.88
PER:            1.75            1.75
delay:          8.00            8.00
OR:             32.00           32.00

Bitswap:        1059            13

Total time = 1 days 2 hours 23 min 57 sec
FEC:            23729805                0
CRC:            2123            0
ES:             1040            0
SES:            20              0
UAS:            80              80
LOS:            2               0
LOF:            18              0
Latest 15 minutes time = 8 min 57 sec
FEC:            5581            0
CRC:            1               0
ES:             1               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
Previous 15 minutes time = 15 min 0 sec
FEC:            9350            0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
Latest 1 day time = 2 hours 23 min 57 sec
FEC:            89841           0
CRC:            2               0
ES:             2               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
Previous 1 day time = 24 hours 0 sec
FEC:            953083          0
CRC:            37              0
ES:             26              0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
Since Link time = 1 days 11 hours 57 min 31 sec
FEC:            1454176         0
CRC:            44              0
ES:             31              0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
>
Logged

j0hn

  • Reg Member
  • ***
  • Posts: 661
Re: just out of interest
« Reply #27 on: February 15, 2017, 02:50:14 PM »

It's worth registering with MyDSLWebStats and uploading your stats via DslStats. This allows everyone else to see your stats anytime you need assistance. I find the graphs much easier to navigate and see in greater detail than those displayed within DslStats.
« Last Edit: February 15, 2017, 05:05:31 PM by j0hn »
Logged
BT FTTC 55/10 ECI Huawei Cab - Zyxel VMG8924 bridge mode + Asus RT-AC68U - minted on MDWS via DslStats

noddy

  • Reg Member
  • ***
  • Posts: 150
Re: just out of interest
« Reply #28 on: February 15, 2017, 04:40:02 PM »

cheers I'll look in to that
Logged

burakkucat

  • Global Moderator
  • Senior Kitizen
  • *
  • Posts: 18769
  • Over the Rainbow
    • The ELRepo Project
Re: just out of interest
« Reply #29 on: February 15, 2017, 10:17:56 PM »

I have been meaning to ask . . .

Are you connected to an exchange that is still using 20CN equipment? For I notice that the modulation being used is G.992.1 (a.k.a. G.Dmt).

If your serving exchange is 21CN equipped, then configuring the modem/router to G.992.3 (i.e. ADSL2) would be beneficial.
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.
Pages: 1 [2] 3 4