Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 2 [3] 4 5 6

Author Topic: ECI connected customers, no 3db profile  (Read 26160 times)

Chrysalis

  • Content Team
  • Addicted Kitizen
  • *
  • Posts: 7382
  • VM Gig1 - AAISP L2TP
Re: ECI connected customers, no 3db profile
« Reply #30 on: February 20, 2017, 06:31:02 AM »

newt you can but i expect those profiles to not be used on lines which are deemed unstable so not on interleaved lines and i think with fast path they may not be happy of the risk of high errors which is why i believe ginp to be a requirement

On my line I noticed some of my recent new crosstalk has gone, the affect is not big tho and it benefited the upstream snrm more than downstream.
« Last Edit: February 20, 2017, 02:04:05 PM by Chrysalis »
Logged

skyeci

  • Kitizen
  • ****
  • Posts: 1383
    • Line stats
Re: ECI connected customers, no 3db profile
« Reply #31 on: June 12, 2017, 05:28:21 PM »

Interesting. Just seen some graphs claiming to be a sky vdsl on eci cab with a snr of 3.3db on the ds with an increased sync on the ds after the resync. Just happened today. Asked for further stats off the modem to be sure if its the correct cab. ... asked him to check if g.inp is on or not too
« Last Edit: June 12, 2017, 05:32:34 PM by skyeci »
Logged

parkdale

  • Reg Member
  • ***
  • Posts: 597
Re: ECI connected customers, no 3db profile
« Reply #32 on: June 12, 2017, 06:11:30 PM »

Hi John, I have attached VDSL2 pic1, on the left is the previous firmware :-\ as displayed.
2nd pic shows 1 weeks worth of stats, since reset been ruler flat SNRM 6db.
OR did something but I haven't found out what it was (Outside of our property!)
Logged
Vodafone FTTC ECI cab 40/10Mb connection / Fritz!box7590

skyeci

  • Kitizen
  • ****
  • Posts: 1383
    • Line stats
Re: ECI connected customers, no 3db profile
« Reply #33 on: June 12, 2017, 06:50:57 PM »

Heres an eci line on 3db by the looks of it. DLM  stepped it down from 6 on the ds today to 3.2.Rise in sync and  max attainable.. no g.inp though which seems a little odd ?
(Not my line)

DSLAM/MSAN type: IFTN:0xb206 / v0xb206
Modem/router firmware: AnnexA version - A2pv6C038m.d24j
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 3 hours 47 min 35 sec
Resyncs: 0 (since 12 Jun 2017 18:22:48)

Downstream   Upstream
Line attenuation (dB): 16.1   0.0
Signal attenuation (dB):   Not monitored   
Connection speed (kbps):   79994   20000
SNR margin (dB): 3.2   11.3
Power (dBm): 6.4   6.4
Interleave depth: 1419   1
INP: 3.00   0
G.INP: Not enabled   Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)   

RSCorr/RS (%): 0.0336   0.0002
RSUnCorr/RS (%): 0.0000   0.0000
ES/hour: 0   0





xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason:   0
Last initialization procedure status:   0
Max:   Upstream rate = 28111 Kbps, Downstream rate = 86620 Kbps
Bearer:   0, Upstream rate = 20000 Kbps, Downstream rate = 79994 Kbps

Link Power State:   L0
Mode:   VDSL2 Annex B
VDSL2 Profile:   Profile 17a
TPS-TC:   PTM Mode(0x0)
Trellis:   U:ON /D:ON
Line Status:   No Defect
Training Status:   Showtime
Down   Up
SNR (dB):   3.2   11.2
Attn(dB):   16.1   0.0
Pwr(dBm):   6.4   6.4






« Last Edit: June 12, 2017, 07:09:29 PM by skyeci »
Logged

Chrysalis

  • Content Team
  • Addicted Kitizen
  • *
  • Posts: 7382
  • VM Gig1 - AAISP L2TP
Re: ECI connected customers, no 3db profile
« Reply #34 on: June 12, 2017, 09:10:09 PM »

that sort of thing can happen with a power cut or similar event, I dont think is any 3db rollout on ECI yet and if there was we should expect a step by step migration so 6db -> 5db > 4db > 3db not 6db > 3db.

I think they will be waiting for g.inp first as well.
Logged

skyeci

  • Kitizen
  • ****
  • Posts: 1383
    • Line stats
Re: ECI connected customers, no 3db profile
« Reply #35 on: June 12, 2017, 09:12:22 PM »

Who knows, time will tell.. be worth keeping an eye anyways..

He is now uploading on mydsl under the id "beezer"
« Last Edit: June 12, 2017, 09:16:40 PM by skyeci »
Logged

Chrysalis

  • Content Team
  • Addicted Kitizen
  • *
  • Posts: 7382
  • VM Gig1 - AAISP L2TP
Re: ECI connected customers, no 3db profile
« Reply #36 on: June 12, 2017, 09:27:16 PM »

no historical data for the account, so I am very far from been convinced.

where are those rrdtool graph from? beezer is on 3db already when he first started plotting on mdws.
Logged

underzone

  • Reg Member
  • ***
  • Posts: 442
Re: ECI connected customers, no 3db profile
« Reply #37 on: June 12, 2017, 09:38:41 PM »

I notice that Beezer is with Sky   ???
Logged

tbailey2

  • Kitizen
  • ****
  • Posts: 1245
Re: ECI connected customers, no 3db profile
« Reply #38 on: June 12, 2017, 09:56:27 PM »

beezer is on 3db already when he first started plotting on mdws.
His most recent resync was at 14:35 before he started uploading at 19:31 and it was an LOS.
Logged
Tony
My Books!
Plusnet 80/20 - DSLstats - HG612/TG582n - ECI

skyeci

  • Kitizen
  • ****
  • Posts: 1383
    • Line stats
Re: ECI connected customers, no 3db profile
« Reply #39 on: June 12, 2017, 10:23:31 PM »

I asked him if he would like to upload as he had not heard of mydslwebstats as I was interested in the line stats after seeing the graphs etc..

Geekofbroadband

  • Reg Member
  • ***
  • Posts: 242
Re: ECI connected customers, no 3db profile
« Reply #40 on: June 16, 2017, 03:57:57 AM »

Not sure what this is, maybe my upload just came off being interleaved but my hub rebooted twice around 2-4am and my upload went from 14Mbs to 21Mbs MAX, the actual data rate is 20000.
Download didnt change stayed at 67370 / 67602

noise margin is: 6.2 / 6.1
Logged

j0hn

  • Kitizen
  • ****
  • Posts: 4093
Re: ECI connected customers, no 3db profile
« Reply #41 on: June 16, 2017, 02:31:03 PM »

The lower dB DLM profiles move in 1dB stages. A jump to 3dB is a classic power cut/DSLAM reboot. The DSLAM firmware is still 206 also. I would expect to see a newer firmware testing G.INP for an ECI line to have a 3dB target.

OpenReach skipped ECI users from the 3dB rollout because of the lack of G.INP. Seeing as though they appear to have sorted that out it doesn't make sense they wouldn't wait for the G.INP rollout to apply the 3dB changes.
Logged
Talktalk FTTP 550/75 - Speedtest - BQM

smallal

  • Reg Member
  • ***
  • Posts: 126
Re: ECI connected customers, no 3db profile
« Reply #42 on: September 03, 2017, 09:58:21 PM »

Is there any more news on the ECI G.INP fix?
Obviously this needs sorting before the 3db profile issue can be addressed on ECI cabinets.
Much talk in the spring of a solution being piloted over the summer & possibly rolled out this autumn.
However there's been no reports of anyone having had it turned back on, which is odd if they are actually testing in the field.
« Last Edit: September 03, 2017, 10:00:22 PM by smallal »
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: ECI connected customers, no 3db profile
« Reply #43 on: September 04, 2017, 01:17:27 AM »

Is there any more news on the ECI G.INP fix?

There is a thread, G.Inp on ECI Possibly Delayed, on that topic in FTTC and FTTH Issues.
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

Chrysalis

  • Content Team
  • Addicted Kitizen
  • *
  • Posts: 7382
  • VM Gig1 - AAISP L2TP
Re: ECI connected customers, no 3db profile
« Reply #44 on: September 04, 2017, 11:13:26 AM »

Not going to bug anyone 3 days after the start of autumn, please at least wait till the end of September to see if something starts happening.
Logged
Pages: 1 2 [3] 4 5 6
 

anything