Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 ... 6 7 [8]

Author Topic: I seem to have Vectoring active on an Huawei  (Read 30389 times)

bewa

  • Just arrived
  • *
  • Posts: 1
Re: I seem to have Vectoring active on an Huawei
« Reply #105 on: January 24, 2017, 08:32:51 PM »

I've just noticed after installing DSL stats on a RPI that g.inp and vectoring is enabled on my line.  I think this was done about 3 months a go and the line speed went from 34mbps to 43 with a max attainable rate of 50mbps.
The cab I'm on is in a small village and I'm about 900mtrs from the cab (following paths and poles).

Here's the stats:

Stats recorded 24 Jan 2017 20:31:05

DSLAM/MSAN type:        BDCM:0xa48c / v0xa48c
Modem/router firmware:  AnnexA version - A2pv6F039g1.d24m
DSL mode:               VDSL2 Profile 17a
Status:                 Showtime
Uptime:                 4 days 19 hours 59 min 38 sec
Resyncs:                0 (since 23 Jan 2017 19:08:59)

DownstreamUpstream
Line attenuation (dB):  23.80.0
Signal attenuation (dB):Not monitored
Connection speed (kbps):439996435
SNR margin (dB):        9.36.4
Power (dBm):            12.82.3
Interleave depth:       161
INP:                    45.000
G.INP:                  EnabledNot enabled
Vectoring status:       1 (VECT_FULL)

RSCorr/RS (%):          0.11570.0212
RSUnCorr/RS (%):        0.00000.0000
ES/hour:                0.050.63

I guess this trial is going national?
Logged

NewtronStar

  • Kitizen
  • ****
  • Posts: 4898
Re: I seem to have Vectoring active on an Huawei
« Reply #106 on: January 24, 2017, 09:35:04 PM »

I guess this trial is going national?

Only on some BDUK huawei cabinets that was on the first trial
Logged

Ronski

  • Helpful
  • Kitizen
  • *
  • Posts: 4300
Re: I seem to have Vectoring active on an Huawei
« Reply #107 on: January 25, 2017, 03:41:00 PM »

I believe vectoring is used on certain cabinets to help meet targets, real shame they don't enable it on all compatible cabinets.
Logged
Formerly restrained by ECI and ali,  now surfing along at 390/36  ;D
Pages: 1 ... 6 7 [8]