Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[roseway]

Include with bitloading stays "ticked" if  "Show as separate graph" is not ticked.

If you're uploading to MDWS, and have SNR per tone enabled for that, then at least one of the two SNR per tone options has to remain enabled in "Items to Monitor". You should get a reminder about that if you try to disable both.

[npr]

I'm please to report that auto saving of snapshots is working perfectly with v5.8.5.
I only want one saved snapshot per day so these are the settings I use:

"Take auto snapshot every": 24 hour(s)

Take first snapshot of the day at":  23:45
The snapshot is actually taken at the next recording after the above time.
My recording interval is to sample every 10 minutes.

There is a small issue I've notice with the past few releases but have failed to report -- sorry.
With the RPi version, in the Configuration > Items to Monitor page, the last item on the page "Vectoring status" is only partly shown. Perhaps a side scroll bar is needed, or is this issue caused by me using TightVNC Viewer?

[roseway]

Thanks for confirming the snapshot situation.

On the other matter, I agree that the page is rather packed, and it probably ought to have a scrollbar. But adding one now would involve quite a lot of fiddling. The easy solution is just to enlarge the window a bit, and the setting will stick.

[broadstairs]

Eric strange happenings for me, I went back to 5.8.4 for about 36 hours and no timeouts apart from the initial ones. So I re-installed 5.8.5 this morning and so far again apart from the initial timeout I have not seen any more. I have no idea what happened before but now seems OK. This BTW is running on W7. Strange things happen sometimes!

Stuart

[toulouse]

I think that is what is called a YYGT, Stuart !!!!!


toulouse

[broadstairs]

I think that is what is called a YYGT, Stuart !!!!!


toulouse

  

Stuart