Topic: Vectoring state: 1 (Read 5856 times)

S.Stephenson · « **Reply #15 on:** August 30, 2016, 01:51:19 PM »

From my understanding on ECI a vectoring engine would take up a line card slot so I don't really see them ever doing it as it would lower the cabinet capacity.

GigabitEthernet · « **Reply #16 on:** August 30, 2016, 02:14:32 PM »

It's a Huawei BDUK cabinet in Hampshire. Never signed up to a trial.

GigabitEthernet · « **Reply #17 on:** August 30, 2016, 02:18:50 PM »

What I have noticed with vectoring is that my line will always sync at 6dB and then a minute or so later, will immediately jump up to 7db. Re-syncing the line does nothing. That extra 1dB is almost permanently set.

ktz392837 · « **Reply #18 on:** August 30, 2016, 04:36:45 PM »

Quote from: broadstairs on August 30, 2016, 08:05:21 AM

Are there any ECI cabs which are Vectoring enabled, or is this just one more thing ECI connected users are left behind on?

Stuart

Thanks that made me smile!

I keep hoping someone will drive into my ECI cab and obliterate it but I guess they would replace like for like instead of something that works like a Huawaii cab.

I think we should cross fingers they will at least have another try with Ginp and 3db targets but that's it.

Chrysalis · « **Reply #19 on:** August 30, 2016, 04:43:43 PM »

Quote from: Black Sheep on August 30, 2016, 07:30:32 AM

Lucky ?? There's loads of Cabs vector-enabled on my patch.

and how many of those are not BDUK funded?

S.Stephenson · « **Reply #20 on:** September 06, 2016, 10:43:30 AM »

I'm just hoping I don't end up getting the ECI of G.Fast

News:

Author Topic: Vectoring state: 1 (Read 5856 times)

S.Stephenson

Re: Vectoring state: 1

GigabitEthernet

Re: Vectoring state: 1

GigabitEthernet

Re: Vectoring state: 1

ktz392837

Re: Vectoring state: 1

Chrysalis

Re: Vectoring state: 1

S.Stephenson

Re: Vectoring state: 1