Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[gsf650sa]

It is G992.1 annex a on 585 & DMT

[kitz]

Both

Mode:                   G.DMT

from the Netgear and

G.992.1 Annex A

from the ST585 prove that its adsl1

If you were on adsl2+, it would show g.dmt.bis+ or G.992.5.


Your line may perform slightly better on adsl2 which is (G.992.3 / G.DMT.bis) - see my earlier post for reasons why. 

[gsf650sa]

Both

Mode:                   G.DMT

from the Netgear and

G.992.1 Annex A

1/ If you were on adsl2+, it would show g.dmt.bis+ or G.992.5.
2/ Your line may perform slightly better on adsl2 which is (G.992.3 / G.DMT.bis) - see my earlier post for reasons why.

1/ Now I know what to look for on the NG. 2/ Understand.

Update from BT forum MOD, message and email, quote from email: ".....checking your account details I can see that your broadband is already on the ADSL2+ equipment in the exchange however the profile mirrors an ADSL max profile due to the lower speeds you get........ .............the profile is set automatically by wholesale when you place an order and the option to choose the profile is not given as they are meant to choose the best one based on your line. I appreciate that you need a faster upload speed so I have placed a request with wholesale to get that uncapped and you should see an improvement in the next 24 hours. Please can you drop me a reply to this email to let me know when you see the increase?

Guessing its just upload thats being uncapped. Hope the target noise goes back to 3 and get back to 1000 more sync. Maybe this thread should be moved to ADSL issues lol.  Thanks for advice

[kitz]

Lets see what they do and what changes are made 

[gsf650sa]

Lets see what they do and what changes are made 

Hi provisioned on ADSL2 according to DSLstats. Speeds as below. Took place at 2pm today so syncs a bit lowish.  Not sure if a new "ten day training" has started, waiting BT reply.  IP profile 4.18 down. Hopefully Sn taget will reduce to 3 again and get back up to the old 56-5900 sync.

Retrain Reason: 8000
Last initialization procedure status:   0
Max:    Upstream rate = 824 Kbps, Downstream rate = 5344 Kbps
Bearer: 0, Upstream rate = 811 Kbps, Downstream rate = 4743 Kbps
 
Link Power State:       L0
Mode:                   ADSL2
TPS-TC:                 ATM Mode
Trellis:                U:ON /D:ON
Line Status:            No Defect
Training Status:        Showtime
                Down            Up
SNR (dB):        4.4             6.1
Attn(dB):        50.5            32.0
Pwr(dBm):        0.0             12.8

[kitz]

If youve moved from maxdsl to adsl2+ then it should trigger a new training phase.