Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 [2]

Author Topic: Notes on the xdslcmd in Broadcom based modems  (Read 39686 times)

tickmike

  • Kitizen
  • ****
  • Posts: 3140
  • Yes Another Penguin !. :)
    • Free Download from.
Re: Notes on the xdslcmd in Broadcom based modems
« Reply #15 on: May 13, 2017, 03:55:34 PM »

13 May 2017 15:52:27
xdslcmd --help
Usage: xdslcmd start [--up] <configure command options>
       xdslcmd stop
       xdslcmd connection [--up] [--down] [--loopback] [--reverb]
           [--medley] [--noretrain] [--L3] [--diagmode] [--L0]
           [--tones <r1-r2,r3-r4,...>] [--normal] [--freezeReverb] [--freezeMedley]
       xdslcmd configure/configure1 [--mod <a|d|l|t|2|p|e|m|M3|M5|v>] [--lpair <(i)nner|(o)uter>]
           [--trellis <on|off>] [--snr <snrQ4>] [--bitswap <on|off>] [--sesdrop <on|off>]
           [--sra <on|off>] [--CoMinMgn <on|off>] [--i24k <on|off>] [--phyReXmt <0xBitMap-UsDs>]
           [--Ginp <0xBitMap-UsDs>] [--TpsTc <0xBitMap-AvPvAaPa>] [--monitorTone <on|off>]
           [--profile <0x00 - 0xFF>|<"8a |8b |8c |8d |12a |12b |17a |30a">] [--us0 <on|off>]
           [--dynamicD <on|off>] [--dynamicF <on|off>] [--SOS <on|off>] [--maxDataRate <maxDsDataRateKbps maxUsDataRateKbps maxAggrDataRateKbps>]
           [--forceJ43 <on|off>] [--toggleJ43B43 <on|off>]
       xdslcmd bert [--start <#seconds>] [--stop] [--show]
       xdslcmd afelb [--time <sec>] [--tones] [--signal <1/2/8>]
       xdslcmd qlnmntr [--time <sec>] [--freq <msec>]
       xdslcmd inm [--start <INMIATO> <INMIATS><INMCC><INM_INPEQ_MODE><INM_INPEQ_FORMAT>] [--show]
       xdslcmd snrclamp [--shape <shapeId>] [--bpshape [bpIndex-bpLevel,]]
       xdslcmd nlnm [--show ] [--setThld <Thld_Num_Tones>]
       xdslcmd diag [--logstart <nBytes>
Logged
I RECOMMEND TRYING / USING PCLinuxOS (www.pclinuxos.com) .
I have a set of 8 fixed IP's From my Eclipse isp.
BT ADSL2 line>HG612 set as a Modem, Bridge, WAN not Bound to LAN1 or 2 >Smoothwall (Hardware Firewall and routing) > Ethernet LAN, DMZ,WiFI LAN and Spare LAN .
DSLstats LAN2  linked Ethernet

shdf

  • Reg Member
  • ***
  • Posts: 347
    • Liveboxinfo
Re: Notes on the xdslcmd in Broadcom based modems
« Reply #16 on: September 29, 2017, 07:45:24 PM »

Here is the xdslctl command from the Technicolor DGA4130 supporting profile 35b :
Quote
root@modemtim:~# xdslctl --version
xdslctl version 1.2
ADSL PHY: AnnexA version - A2pvbH042r.d26m

Quote
root@modemtim:~# xdslctl --help
Usage: xdslctl start [--up] <configure command options>
       xdslctl stop
       xdslctl connection [--up] [--down] [--loopback] [--reverb]
           [--medley] [--noretrain] [--L3] [--diagmode] [--L0]
           [--tones <r1-r2,r3-r4,...>] [--normal] [--freezeReverb] [--freezeMedley]
       xdslctl configure/configure1 [--mod <a|d|l|t|2|p|e|m|M3|M5|v>] [--lpair <(i)nner|(o)uter>]
           [--trellis <on|off>] [--snr <snrQ4>] [--bitswap <on|off>] [--sesdrop <on|off>]
           [--sra <on|off>] [--CoMinMgn <on|off>] [--i24k <on|off>] [--phyReXmt <0xBitMap-UsDs>]
           [--Ginp <0xBitMap-UsDs>] [--TpsTc <0xBitMap-AvPvAaPa>] [--monitorTone <on|off>]
           [--profile <0x00 - 0xFF>|<"8a |8b |8c |8d |12a |12b |17a |30a">] [--us0 <on|off>]
           [--dynamicD <on|off>] [--dynamicF <on|off>] [--SOS <on|off>] [--maxDataRate <maxDsDataRateKbps maxUsDataRateKbps maxAggrDataRateKbps>]
           [--forceJ43 <on|off>] [--toggleJ43B43 <on|off>]
       xdslctl bert [--start <#seconds>] [--stop] [--show]
       xdslctl afelb [--time <sec>] [--tones] [--signal <1/2/8>]
       xdslctl qlnmntr [--time <sec>] [--freq <msec>]
       xdslctl inm [--start <INMIATO> <INMIATS><INMCC><INM_INPEQ_MODE><INM_INPEQ_FORMAT>] [--show]
       xdslctl snrclamp [--shape <shapeId>] [--bpshape [bpIndex-bpLevel,]]
       xdslctl nlnm [--show ] [--setThld <Thld_Num_Tones>]
       xdslctl diag [--logstart <nBytes>] [--logpause] [--logstop] [--loguntilbufferfull <nBytes>] [--loguntilretrain <nBytes>] [--dumpBuf <sizeKb>]
       xdslctl ntr [--start [output freq(default is 8000)]] [--stop]
       xdslctl selt [--start] [--stop] [--status] [--steps <steps_bitmap>] [--cfg <selt_cfg>]
       xdslctl info [--state] [--show] [--stats] [--SNR] [--QLN] [--Hlog] [--Hlin] [--HlinS] [--Bits][--pbParams] [--linediag] [--linediag1] [--UER] [--EchoVariance] [--RNC_QLN] [--reset] [--vendor] [--cfg]
       xdslctl profile [--show] [--save] [--restore]
       xdslctl --version
       xdslctl --help
« Last Edit: September 29, 2017, 07:50:12 PM by shdf »
Logged
DGA4130 Firmware 1.1.0 GUI TIM unlocked
DGA4132 Firmware 1.1.0 GUI TIM unlocked
MEGA : https://mega.nz/#F!yM0RkJjT!I7Y8-mreSHLUW7uPuZtZgQ

Dray

  • Kitizen
  • ****
  • Posts: 2362
Re: Notes on the xdslcmd in Broadcom based modems
« Reply #17 on: September 29, 2017, 08:02:51 PM »

I notice xdslctl configure [--profile <0x00 - 0xFF>|<"8a |8b |8c |8d |12a |12b |17a |30a">] doesn't include 35b
Logged

smf22

  • Member
  • **
  • Posts: 47
Re: Notes on the xdslcmd in Broadcom based modems
« Reply #18 on: September 29, 2017, 08:24:48 PM »

Help is probably not up to date. There's no xdslctl info --vectoring either.
Logged
BT FTTC 80/20 Huawei Cab - Zyxel VMG8924-B10A bridge mode + Ubiquiti EdgeRouter X

shdf

  • Reg Member
  • ***
  • Posts: 347
    • Liveboxinfo
Re: Notes on the xdslcmd in Broadcom based modems
« Reply #19 on: October 02, 2017, 05:10:28 PM »

Quote
root@modemtim:~# xdslctl info --vectoring
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason:    1000000
Last initialization procedure status:   0
Max:    Upstream rate = 17418 Kbps, Downstream rate = 93312 Kbps
Bearer: 0, Upstream rate = 18579 Kbps, Downstream rate = 90640 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Vectoring state: 5
VCE MAC Address: 0:0:0:0:0:0
Total error samples Ethernet pkts sent: 0
Total error samples Ethernet pkts discarded: 0
Total error samples statuses sent: 0
Total error samples statuses discarded: 0
Logged
DGA4130 Firmware 1.1.0 GUI TIM unlocked
DGA4132 Firmware 1.1.0 GUI TIM unlocked
MEGA : https://mega.nz/#F!yM0RkJjT!I7Y8-mreSHLUW7uPuZtZgQ

Dcm12

  • Member
  • **
  • Posts: 44
Re: Notes on the xdslcmd in Broadcom based modems
« Reply #20 on: February 06, 2018, 03:53:46 PM »

is any of this achievable in a mac    i just accrued my echo life HG612 need to hack and see stats .
thanks
Logged

j0hn

  • Kitizen
  • ****
  • Posts: 1354
Re: Notes on the xdslcmd in Broadcom based modems
« Reply #21 on: February 06, 2018, 04:12:43 PM »

is any of this achievable in a mac    i just accrued my echo life HG612 need to hack and see stats .
thanks
Absolutely.
http://www.kitz.co.uk/routers/hg612unlock.htm
The unlocked firmware is uploaded via any browser.
Macs allow you to set the IP of your network adapter, and there are many telnet clients available for macs.
Logged
BT FTTC 55/10 ECI Huawei Cab - Zyxel VMG1312-B10A bridge mode + Asus RT-AC68U running Asuswrt-Merlin - minted on MDWS via DslStats

Dcm12

  • Member
  • **
  • Posts: 44
Re: Notes on the xdslcmd in Broadcom based modems
« Reply #22 on: February 08, 2018, 02:47:38 PM »

thank you I'm underway with this today .
Logged

shdf

  • Reg Member
  • ***
  • Posts: 347
    • Liveboxinfo
Re: Notes on the xdslcmd in Broadcom based modems
« Reply #23 on: March 05, 2018, 10:42:15 AM »

Hi, the DGA4130 latest xdslctl command from the latest Firmware 1.1.0 :
Quote
root@modemtim:~# xdslctl --help
Usage: xdslctl start [--up] <configure command options>
       xdslctl stop
       xdslctl connection [--up] [--down] [--loopback] [--reverb]
           [--medley] [--noretrain] [--L3] [--diagmode] [--L0]
           [--tones <r1-r2,r3-r4,...>] [--normal] [--freezeReverb] [--freezeMedley]
       xdslctl configure/configure1 [--mod <a|d|l|t|2|p|e|m|M3|M5|v>] [--lpair <(i)nner|(o)uter>]
           [--trellis <on|off>] [--snr <snrQ4>] [--bitswap <on|off>] [--sesdrop <on|off>]
           [--sra <on|off>] [--CoMinMgn <on|off>] [--minINP <sym>] [--maxDelay <ms>] [--i24k <on|off>] [--phyReXmt <0xBitMap-UsDs>]
           [--Ginp <0xBitMap-UsDs>] [--TpsTc <0xBitMap-AvPvAaPa>] [--monitorTone <on|off>]
           [--profile <0x00 - 0xFF>|<"8a |8b |8c |8d |12a |12b |17a |30a">] [--us0 <on|off>]
           [--dynamicD <on|off>] [--dynamicF <on|off>] [--SOS <on|off>] [--maxDataRate <maxDsDataRateKbps maxUsDataRateKbps maxAggrDataRateKbps>]
           [--forceJ43 <on|off>] [--toggleJ43B43 <on|off>]
       xdslctl bert [--start <#seconds>] [--stop] [--show]
       xdslctl afelb [--time <sec>] [--tones] [--signal <1/2/8>]
       xdslctl qlnmntr [--time <sec>] [--freq <msec>]
       xdslctl inm [--start <INMIATO> <INMIATS><INMCC><INM_INPEQ_MODE><INM_INPEQ_FORMAT>] [--show]
       xdslctl snrclamp [--shape <shapeId>] [--bpshape [bpIndex-bpLevel,]]
       xdslctl nlnm [--show ] [--setThld <Thld_Num_Tones>]
       xdslctl diag [--logstart <nBytes>] [--logpause] [--logstop] [--loguntilbufferfull <nBytes>] [--loguntilretrain <nBytes>] [--dumpBuf <sizeKb>]
       xdslctl ntr [--start [output freq(default is 8000)]] [--stop]
       xdslctl selt [--start] [--stop] [--status] [--steps <steps_bitmap>] [--cfg <selt_cfg>]
       xdslctl info [--state] [--show] [--stats] [--SNR] [--QLN] [--Hlog] [--Hlin] [--HlinS] [--Bits]
           [--pbParams] [--linediag] [--linediag1] [--UER] [--EchoVariance] [--RNC_QLN] [--reset] [--vendor] [--cfg]
       xdslctl profile [--show] [--save] [--restore]
       xdslctl --version
       xdslctl --help
Logged
DGA4130 Firmware 1.1.0 GUI TIM unlocked
DGA4132 Firmware 1.1.0 GUI TIM unlocked
MEGA : https://mega.nz/#F!yM0RkJjT!I7Y8-mreSHLUW7uPuZtZgQ
Pages: 1 [2]