Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 [2] 3 4

Author Topic: HG612 GUI  (Read 17595 times)

les-70

  • Kitizen
  • ****
  • Posts: 1254
Re: HG612 GUI
« Reply #15 on: July 07, 2014, 05:51:12 PM »
  It may be worth using checking the software version by using the command "equipcmd swversion display"

 e.g. with no update

# equipcmd swversion display
software version: V100R001C01B030SP06
xdsl firmware version: A2pv6C038m.d24j
cpu version: BCM6368
cfe version: 1.0.37-102.6
display version success#

Logged

Bald_Eagle1

  • Helpful
  • Kitizen
  • *
  • Posts: 2721
Re: HG612 GUI
« Reply #16 on: July 07, 2014, 06:27:08 PM »
Quote from: les-70 on July 07, 2014, 05:51:12 PM
  It may be worth using checking the software version by using the command "equipcmd swversion display"

 e.g. with no update

# equipcmd swversion display
software version: V100R001C01B030SP06
xdsl firmware version: A2pv6C038m.d24j
cpu version: BCM6368
cfe version: 1.0.37-102.6
display version success#



Thanks for that Les.

Is that from a btagent enabled or a no-btagent version?


This is mine (GUI currently disabled & difference highlighted in RED):-

# equipcmd swversion display
software version: V100R001C01B030SP08
xdsl firmware version: A2pv6C038m.d24j
cpu version: BCM6368
cfe version: 1.0.37-102.6
display version success#



Logged

les-70

  • Kitizen
  • ****
  • Posts: 1254
Re: HG612 GUI
« Reply #17 on: July 07, 2014, 06:39:31 PM »
  It is from a no btagent version.    You obviously is new software but with no update of the adsl_phy.   It will be interesting if Howlingwolf or another with enough expertise unravels what may be new or even more locked down.   I will try my spare HG612 with a btagent version to see what happens but as I am an ECI cab I am not sure that it will update.
« Last Edit: July 07, 2014, 07:08:01 PM by les-70 »
Logged

NewtronStar

  • Kitizen
  • ****
  • Posts: 4898
Re: HG612 GUI
« Reply #18 on: July 07, 2014, 06:59:14 PM »
Have not re-flashed the HG612 since the HG612 GUI was removed and have the same result as BE1.

# equipcmd swversion display
software version: V100R001C01B030SP08
xdsl firmware version: A2pv6C038m.d24j
cpu version: BCM6368
cfe version: 1.0.37-102.6
display version success#
Logged

les-70

  • Kitizen
  • ****
  • Posts: 1254
Re: HG612 GUI
« Reply #19 on: July 07, 2014, 07:17:47 PM »
  I am now running with the bt agent version to see if anything turns up.  Does anyone know if the update also goes though ECI DSLAM's, I am guessing that it may since BT is reported to have installed Hg612's with some ECI DSLAM lines.  The swap has confirmed my past inference that my spare HG612 gives a slightly lower attainable with a fixed speed cap. About 0.6Mb/s less with my spare
Logged

perry081064

  • Member
  • **
  • Posts: 93
Re: HG612 GUI
« Reply #20 on: July 07, 2014, 07:40:31 PM »
im on a ECI cab . i use no btagent , and confirm i can still access.
Logged

Ducky

  • Member
  • **
  • Posts: 26
Re: HG612 GUI
« Reply #21 on: July 08, 2014, 12:56:02 PM »
I think I'm running the no-btagent version, but will double check this evening!  :)
Logged

les-70

  • Kitizen
  • ****
  • Posts: 1254
Re: HG612 GUI
« Reply #22 on: July 08, 2014, 01:12:53 PM »
   As advised I am now running the unlockedgui version with the bt agent and noticed that the ptm.1.301 TR069 agent is not there.   ???  Is this due to something that I have done or is it built into the unlockedgui version.   I have done a resest and even gone back to the original 030 firmare which has it and confirmed that just upgrading to the unlockedgui gets rid of it.  I assume it is not needed for the update.

 Did anyone notice whether they had the TR069 or not, before they had the latest update?
Logged

perry081064

  • Member
  • **
  • Posts: 93
Re: HG612 GUI
« Reply #23 on: July 08, 2014, 02:29:30 PM »
further to my previous comment , i find after having to power down the modem this morning due to a house wiring inspection , i can no longer access the modem remotely via 192.168.1.1

i am running the NO BTAGENT version  :(

edit: rebooted pc and can now access again , wierd  ???
« Last Edit: July 08, 2014, 03:31:46 PM by perry081064 »
Logged

bob8

  • Member
  • **
  • Posts: 14
Re: HG612 GUI
« Reply #24 on: July 08, 2014, 02:35:09 PM »
fwiw, I have not had any issues accessing the GUI so far since I installed my HG612 more than a year ago.

I'm using asbokid's original SP10 unlocked firmware, and have always deleted the PTM1.301 TR069 VLAN entry which BT use at a backdoor to assign an IP address to the HG612 when used in normal bridge mode.    I have never telnetted into the HG612 to manually stop the BT agent which I know is running. (Does anyone really know what the BT agent does ??).

NPR's suggestion regarding removing 301 VLAN
http://npr.me.uk/hg612.html

Where ppl have reported they can no longer access the GUI, do they know if the 301 VLAN was present?
« Last Edit: July 10, 2014, 12:12:06 PM by bob8 »
Logged

Semmy

  • Reg Member
  • ***
  • Posts: 120
Re: HG612 GUI
« Reply #25 on: July 09, 2014, 11:13:57 PM »
Hmmm, on the unlocked no bt agent and still connecting in to the GUI OK.
Logged
Ideal Epitaph - "I knew I shouldn't have pressed that button"

Bald_Eagle1

  • Helpful
  • Kitizen
  • *
  • Posts: 2721
Re: HG612 GUI
« Reply #26 on: July 09, 2014, 11:40:04 PM »
It is still the same firmware version, but this is the new software version

software version: V100R001C01B030SP08

It was software version: V100R001C01B030SP06 until a few days ago.


If you use HG612 Modem Stats, for logging/graphing, enable the Receive beta updates & you should then have v 3.0.0.1 of the programs.

The HG612's firmware version & software version are now recorded in the Plink logs & are included in the snapshot montage as per the attached example.

Logged

Ronski

  • Helpful
  • Kitizen
  • *
  • Posts: 4302
Re: HG612 GUI
« Reply #27 on: July 10, 2014, 07:15:59 AM »
BE1, the update works!  :)

Here's my version info:

equipcmd swversion display
software version: V100R001C01B030SP06
xdsl firmware version: A2pv6C038m.d24j
cpu version: BCM6368
cfe version: 1.0.37-102.6
Logged
Formerly restrained by ECI and ali,  now surfing along at 550/52  ;D

Ronski

  • Helpful
  • Kitizen
  • *
  • Posts: 4302
Re: HG612 GUI
« Reply #28 on: July 10, 2014, 07:56:41 AM »
And for my modem at work:

software version: V100R001C01B030SP08
xdsl firmware version: A2pv6C038m.d24j
cpu version: BCM6368
cfe version: 1.0.37-102.6

So the one at work has been updated, and the one at home hasn't. The works one has been restarted many times recently  due to power cuts, connection problems and changing the router.
Logged
Formerly restrained by ECI and ali,  now surfing along at 550/52  ;D

NewtronStar

  • Kitizen
  • ****
  • Posts: 4898
Re: HG612 GUI
« Reply #29 on: July 10, 2014, 11:05:57 PM »
Yeah I have got the v 3.0.0.1 of the programs it came in to-day with viewer and settings editor V3

I still have no HG612 GUI unless i re-flash back to Wolfys bcm96368MVWG_fs_kernel_HG612V100R001C01B030SP06_unlockedgui but after 24 hours I am sure the HG612 GUI will again be gone.

What should I do stay as is with software version: V100R001C01B030SP08
xdsl firmware version: A2pv6C038m.d24j

Still unsure what this new software is supposed to fix as it's different to 2013 update I can't see any change visually in bandplans  :-\
« Last Edit: July 10, 2014, 11:12:35 PM by NewtronStar »
Logged
Pages: 1 [2] 3 4
« previous next »