Kitz Forum

Broadband Related => Broadband Hardware => Topic started by: Deathstar on January 10, 2018, 05:59:33 PM

Title: Great Tutorials and Posts. [1312-B10A]
Post by: Deathstar on January 10, 2018, 05:59:33 PM
Well it's been a fun couple of days.

My new 1312-B10A arrived yesterday, branded as iTalk.
With the posts on the forum I was able to de-brand with vanilla firmware and ROM-D cleared by using the dumpmdm command to get the supervisor password.
TR-069 disabled etc.

Setup in bridge mode, with my Asus DSL-AC68U.

Then setup DSLStats and MDWS, all very straightforward.

Noticed a retrain during the night (3am) G.INP enabled and an 8mb gain in sync rate....
Wonder if I will get vectoring (BDUK Cab).

This morning my Pi3 arrived, DSLStats migrated to the Pi and again all good.

All thanks the wiki and the posts other members have made and to those that have helped them.

Just need to set DSLStats to automatically start on Pi boot now.

Thanks all!



Sent from my SM-G930F using Tapatalk

Title: Re: Great Tutorials and Posts.
Post by: Weaver on January 10, 2018, 06:16:07 PM
Let us know how you get on with it.

Any chance of doing some ipv6 btw?
Title: Re: Great Tutorials and Posts.
Post by: tiffy on January 10, 2018, 08:06:57 PM
@ Deathstar

Quote
Just need to set DSLStats to automatically start on Pi boot now.

See http://forum.kitz.co.uk/index.php/topic,20672.msg360097.html#msg360097

I had quite a struggle getting my RPi's to auto-start DSLStats @ power-up, finally resolved thanks to two very helpful & knowledgable forum members, see towards the end of the thread, you may find this helpful.
Title: Re: Great Tutorials and Posts.
Post by: Deathstar on January 11, 2018, 07:43:40 PM
Perfect @tiffy!

Mine was slightly different as I nodded the LXDE file, as I am using Jesse with pixel.
But it pointed me in the right direction.

Many thanks

Sent from my SM-G930F using Tapatalk