Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[skyeci]

Well we will see. As I posted some months ago I was told if testing went well which was mentioned as oct-dec 2016 it may return from April sometime...

.
This software will be tested by Openreach during Q3 (Oct-Dec) with deployment likely to commence, in consultation with the Service Provider community around April 2017.
 

[elliottchandler]

cwave was my stats but changed the router to VMG8324 because Zyxel said they have a problem with the modem code in VMG1312 and they will release new software in March. I don't believe that VMG8324 is supported on mydslwebstats

[gt94sss2]

I don't believe that VMG8324 is supported on mydslwebstats

It is.

[roseway]

MDWS isn't interested in what modem you use, although it allows you to enter it manually if you wish. DSLstats supports the VMG8324-B10A.

[elliottchandler]

Ok thanks. I have setup it up again.

[j0hn]

and you do indeed have G.INP active on your line.
you're definitely on an ECI cabinet yes?
not being a BT TV customer, perhaps your cabinet is 1 trialing the new G.INP firmware
could you post the results of adsl info --vendor for us
or post the 1st line from the Stats tab in DslStats, it starts "DSLAM/MSAN type:"

[skyeci]

he is coming up as huawei now 

[j0hn]

It said ECI an hour ago
also
http://forum.kitz.co.uk/index.php/topic,19135.msg340221.html#msg340221
that post shows him as ECI
Unless he has both cabinets and got a port swap. I know he was having problems

edit: definitely been swapped to Huawei looking at the tones in use. Oh well.

elliott, were you even aware that Openreach changed you from 1 cabinet to another? or that you had a new cabinet installed at your PCP?

[elliottchandler]

We have had engineer visits as had issues but didn't get a report on cabinet change.

[j0hn]

DLM appears to be completely ignoring my line.
I've been live for 22 days and it's still not applied G.INP.
That's nothing new though, we've seen long waits for G.INP before. What I haven't seen before is DLM ignoring ES numbers completely.
I've smashed the ES limit for the past few days but still my line is running fastpath.
Anyone seen this happen before?
Sorry about the huge screenshots, I'm on my mobile.
Minted on MDWS

[attachment deleted by admin]

[attachment deleted by admin]

[skyeci]

Just checked your stats John. Its concerning you still have red x3 and no g.inp.... perhaps the cab was not setup properly when it was commissioned?  -that ECI just wont let you go 

[WWWombat]

Anyone seen this happen before?

Yes - when DLM considers there to have been a "wide area event". Electrical storm can trigger that detection.

Though maybe not for a few days running.

[renluop]

A bit of an aside, if you'll excuse it!

Going to catch the bus other day, I saw the next cab down the road from mine, #8, had a large hole, roughly 3 x 2 safety barriers in size, with two sets of cables emerging from pipes. Seemed a large hole. I'd love to know what's up, but at 10 a.m.there was no one to ask.

[burakkucat]

. . . #8, had a large hole, roughly 3 x 2 safety barriers in size, with two sets of cables emerging from pipes.

From your description I will suggest that a new jointing chamber is being built. Possibly just an enlargement of what was previously available. I don't suppose you can recall if a joint-box lid was present at that location? Is the hole in the pavement/footpath or the roadway?

[j0hn]

Just checked your stats John. Its concerning you still have red x3 and no g.inp.... perhaps the cab was not setup properly when it was commissioned?  -that ECI just wont let you go 

Turns out that OpenReach have told BT my order is delayed, and BT have confirmed I have no active packages/products. I was informed by the OpenReach engineer who enabled my line there was a problem on the E-Side (No working free pairs) and they would come back and fix that soon. I never noticed that BT hadn't billed me at all.

So looks like DLM isn't watching my line as my order isn't complete. I've had free broadband for nearly 2 months. No idea if the landline works as I have an unfiltered DSL only faceplate installed. Just tried my phone number on the BTw broadband availability checker and it says no data for this number. I knew there was an issue with the order, but assumed the account was activated.