Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[konrado5]

My router reports DSLAM/MSAN type as BDCM:0xa48d / v0xa48d. Up to yesterday it had been reporting as: BDCM:0xa32f / v0x32f . Is it new DSLAM firmware or rather new DSLAM? I've also noticed, my router reports upstream particular tones SNR, up to yesterday it had not been reporting.

Best regards
konrado5

[burakkucat]

I do not think that is indicative of a firmware upgrade but suspect that the line card has been swapped out -- possibly for a newer revision.

The other, but less likely, reason would be a swap over to a different DSLAM.

If you could have access to the appropriate technical people at your ISP then they would be the ones to ask.

[konrado5]

Unfortunately my ISP gives information about technical details with reluctance. I suspect they swapped DSLAM line cards so as to enable G.INP. But I have G.INP disabled.

Best regards
konrado5

[GigabitEthernet]

I am afraid we will not be able to answer this question. As bk said, best thing to do would to be to get onto somebody at your ISP.

[konrado5]

I've noticed information about chipser serial number.
ChipSet Vendor Id:      BDCM:0xa48d
ChipSet VersionNumber:  0xa48d
ChipSet SerialNumber:   AA1050FE23C-20

[kitz]

I'd agree with b*cat.   It looks like a new line card.